Recent content by gerrymc

my pc spec is i4670k asus sabertooth mobo Kingston ssd windows 7 64 bit when I try to install bullguard av it freezes my pc on installation causing me to have to press and hold power button to get out of lock up any ideas im stumped :(

I tried to install a 2tb hdd drive as secondary drive to my ssd Kingston ( main drive ) but when I powered on it does not even recognize it all new cabling though that might be prob so I swapped out cabling same result is there specific ports on mobo you gotta plug into with sata cable plz hlp :(

have built my pc touch wood everything running smooth:) have been told about prime 95 my question is im running at stock speed do you run prime 95 when you overclock or before to see if there is any issues with build BTW im novice so im so appreciative of any tech info I can get from you good...

hi people have just built lovely gaming rig installed 64bit win 7 and low and behold I cant connect to internet apparently the network adapters are not installed ? I thought these came with windows mobo z87 any ideas ssd drive have tried 2 installs while connected to internet still no change im...

my bad Bartholomew it helps when I put my glasses on temp is 84.2F / 29*C thanks for advice ive reseated cooler just as precaution

sorry guys my bad it helps when I put my glasses on its 78*F / 27*C I read figures wrong ty for replys.

just put together a gaming pc z87 i5 4670k dark rock 2 cooler thermal paste applied but im getting temps of 78-80*c on idle any suggestions plz

yes it running 80 degree on idle

have just built a gaming pc z87 sabertooth mobo dark rock 2 cooler when I powered it up it comes up cpu fan error its plugged into correct slot in bios its red highlighted running at 500 rpm cpu temp 78 degrees is something wrong here hlp plz :(

Hi all im completing my first build gaming rig but i am unsure about connecting up the monitor. Do i plug the monitor into the motherboard or the graphics card im installing for the first power up to install windows 7. All help appreciated as i dont want to mess it up. Thx

Yes i would like to overclock would parts cause problems if i did ??

Good morning all thankyou for reading this request. I am building a gaming pc and i want to make sure that i wont run into any major issues with parts in the build this is my first serious build btw so all advice is most welcome. I have a few parts so far all new such as...

Hi to all of you hope you have had a good day:) This is my first serious build BTW so im pretty new to all of it apart from pretty reasonable results with parts & reading up :/ my question is i would like to install vengeance pro 1866mhz into my sabertooth Z87 board brand new board im installing...

thanks for pointers people I wasn't aware about going above 1.5v would void cpu warranty. I will look at memory modules rated at 1.5v many thx