Recent content by gogrp89

this answer is probably too late for OP but can be useful other people. i had a legacy ssd installation on a different platform, it also boot very fast in legacy mode but trouble in uefi mode - windows complain corruption....and wants to do useless repair after I turn off raid support, switch...

thx, Calvin, I was hoping I could avoid the time consuming fresh install and installing quite a few software and configuration. one more thing, I can still attach non uefi formated existing drive to sata 1-6 with the uefi and no uefi setting, right?

how to make MSI Z370-A pro boot with Intel ssd 760p on NVME m.2 slot? In the bios status I can see the Intel ssd 760p drive as Intel SSDPEKKW...(the product code) on M2.1 but it's hidden from the boot menu. I tried also with Vantec M.2 NVME SSD PCIe x4 adapter, did not help Btw I tried the...

apparently any ddr2 dimm available from the web tends to look shorter : instead of 2 full side slots at ends, only one and half slots, leaving a lot less space between top edge and bottom edge( the pin edge). also timing info is lacking However I did find one listing that looks perfectly ok in...

currently using Corsiar xms 4x2 800 Mhz running windows 8.1 x64. the spec for the board calls for: P45/ich10r intel FMA 1600/1333/1066/800 MHz 4 x DIMM, max. 16GB, DDR2 1200/1066/800/667MHz, non-ECC, un-buffered memory like to increase to at least 12 GB by replace a pair with 2x4GB but...

i7-8700 on MSI Z370-A PRO LGA 1151 G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 Model F4-3200C16D 1 intel SSD 500GB as boot disk 3x seagate Baracuda SataIII 2TB Versa H22 Mid Tower Case corsair CX650M 1 usb3 1TB drive the above is the initial config to run windows 10...