Recent content by Hardtry

  1. Hardtry

    Question G.Skill 3600 CL16 memory performing below expectations

    Ok, so that explains why you have double the write speed. I will try to manually set up the ram, maybe it helps as now I feel really uncertain. AIDA seems ok but all other benchmarks show slower speeds, even the DRAM Calculator.
  2. Hardtry

    Question G.Skill 3600 CL16 memory performing below expectations

    I have mine in 2 and 4. What CPU do you have?
  3. Hardtry

    Question G.Skill 3600 CL16 memory performing below expectations

    Are you sure that you had it at 3600 in the first run? It says there it's at 2133. I would test again with 3600. I tested mine with AIDA and it shows the following. Also tested with Ryzen DRAM Calculator and it gives the same results as PassMark. How can I be sure my memory is all ok?
  4. Hardtry

    Question G.Skill 3600 CL16 memory performing below expectations

    Hey guys, I recently switched to AMD from my i7 4790K, I did a lot of research and bought the following: - Gigabyte X570 Aorus Master - AMD Ryzen 7 3700X - G.Skill Ripjaws V 3600MHz Cl16 (F4-3600C16D-16GVK) I set XMP to Profile 1 and all looks well and the PC worked without any...
  5. Hardtry

    CPU Upgrade from i5 4570 to i7 4770K

    I upgraded to the i7 4790K, I was lucky to find a guy who wanted an i5 plus a difference (75$). I did not test the new CPU in any game yes but I wanted to ask you guys, as I did a Userbenchmark and the results for my memory were way below expectations. I have 3*4GB Kingston HyperX Fury 1866MHz...
  6. Hardtry

    CPU Upgrade from i5 4570 to i7 4770K

    I saw a decreased performance in Far Cry 4, where I have framedrops, high CPU Usage (80-90%) and low GPU Usage (60%). The 4770K upgrade would be faster, as I can do it now and not have to wait to sell all my existing hardware and save up more money for the upgrade.
  7. Hardtry

    CPU Upgrade from i5 4570 to i7 4770K

    Hey guys, I have the following setup, and I was thinking about upgrading to an i7 4770K (arround 200$) while selling my i5 4570 (~120$). Is it a worthy upgrade? I am constantly seeing a cpu usage of over 80% in games, and I would like to know if I the i7 4770K is ok or I should change everything...
  8. Hardtry

    ntoskrnl.exe BSOD Windows 10

    No BSOD's till now, so I returned that stick, and I how have the remaining 3, 12GB, running fine. Thank you everyone for the help and every suggestion, I am really graceful.
  9. Hardtry

    ntoskrnl.exe BSOD Windows 10

    Hello, no issues with two stick.. but none of them was in a set. I upgraded my ram throughout the years. But, i tried the only combo I did not try before, my oldest 2 sticks and the last one i bought. It's been 3 days now without a BSOD. Maybe the 3'rd one I bough had some compatibility issues...
  10. Hardtry

    ntoskrnl.exe BSOD Windows 10

    To be honest I did not try slots 1-3, as the motherboard manual says to use slots 2-4, or 1-2-3-4. I will try this now. But.. couldn't it just be that the motherboard has some issue so that it can't use correctly more than 2 slots?
  11. Hardtry

    ntoskrnl.exe BSOD Windows 10

    CPU-Z shows 933, also, I have the latest BIOS. Buying 2x 8GB after I already own 16GB (let's say 12 as I can send 1 stick back) would be a far more costly measure than buying another board. I will try to install the 2 other Kinstone sticks (replace the installed ones) to see how that works...
  12. Hardtry

    ntoskrnl.exe BSOD Windows 10

    So, for anort3.. I started with 2 Kingston sticks and 2 Teamgroup ones. WIth the teamgroup ones instant BSOD, even the windows install gave a BSOD. So, I took them out, and everything was ok for a couple of days. Then, I bought another kingston stick, because I said 8GB is not enough. The BSOD's...
  13. Hardtry

    ntoskrnl.exe BSOD Windows 10

    My ram speed is set to Auto, and displays 1866 in the BIOS, also if I set them to 1866 manually, windows still shows 1333... these Kingston ones don't support XMP sadly. I reinstalled windows once.. when I had only 3 of these Kingston rams and it did not help.
  14. Hardtry

    ntoskrnl.exe BSOD Windows 10

    Yes, in the last dump I had all 4 installed. The odd thing is the 1333MHz reading. I have the rams set to 1866
  15. Hardtry

    ntoskrnl.exe BSOD Windows 10

    It's been 2 days, and no crash since running only with 2x 4gb. I have not tested if this is enough, but the bad thing is that I cannot send one of the new bought sticks back, so maybe I will have to change my motherboard. I found an Asrock Z87 Extreme 4 for cheap, is it a good board?