Recent content by Harish Anim

I have a triple monitor setup, one of them is my drawing pen display, my main monitor is the only one connected through display port while the rest are hdmi, I've had this issue for almost 4 years now, I figured it was a issue with my old 1060 graphic card and didn't bother with it, I recently...

just dusted every part, only the radiator i ran some water through and dried it, which again i always do, everything else was just wiped with a cloth or tissue and dusted with a brush, most of my parts were clean tbh, it was just the case that was dirty, so i pretty much just took everything...

so yesterday I decided to clean my pc since it had been a while and since I'm home anyway, I didn't really change anything or add or remove anything, apart from moving ram slots, rams of same type were put together, so i alternated them, that was about it, I plugged in my pc and one thing that...

Yeah sorry for the late reply, I wasn't home, I'm here for the rest of the day now, I boot usb and since main disk is empty and only start up disk is my USB, it boots into macOs utilities, then I click on reinstall OS, it does that till it says 2 minutes remaining and when I check logs this is...

Ok little bit of history, it's a old mid 2011 imac, its last supporting OS is High Sierra, but ever since El Capitan I've been trying to update my OS and I've constantly run into numerous issues, I never really got too into fully fixing the issues coz I'd eventually give up trying for hours...

I just finished installing windows 10 and just as I did with windows 7 I redirected my C drive to F with regedit and then went to app data and changed the location for all folder in there to F too, I did this because I use a ssd, I restarted the comp and now can't access any file , folder or...

So yesterday I installed windows 7 on my new 240gb SSD and I did not want any software installs or temp files getting stored on it, so i follower this guide http://www.nextofwindows.com/how-to-change-user-profile-default-location-in-windows-7 and changed my default Users path from C:\Users\xxxx...

I just installed a new SSD yesterday and I installed my OS on it, I've changed the default, install locations and stuff to another drive, the shortcuts worked fine yesterday and the 'start in' option still shows the proper directory, but the 'target' option is defaulting back to the C drive, I...

I am trying to connect my pc to my lg smart tv using miracast but when i open the connect option on my pc i get the your pc or mobile device doesn't support miracast so it can't project wirelessly, but when i go to the connected devices setting in my control panel i see my TV under play...

it stays at 800MHz

im not talking about the RAM im asking about my cpu's clock speed, that is at 800MHz RAM runs at 1300MHz , what it's supposed to be at

so after a couple hundred tries and reseting cmos and disabling speed step, and disabling turbo mode , i set the clock to 40 (4.0GHz) and DRam is at 1066MHz but still i somehow end up with only 800mhz! please help!

well i do have the latest firmware, but it still happens and even with xHci on i tried a usb 2.0 port but had lots of static and the firware would just stop mid way and say update failed, the funny thing is after disabling xHci the headset works fine on the same port it messed up on, no static...

oh you've got it wrong, the headphones im using are the razer megalodon, those are usb headphones, sorry i forgot to mention that, so is disabling the xHci for this headphone gonna do some noticeable changes?