Recent content by i9-9999k

bump

from my experience it is hard to find a good usb 3 expansion card. is it a pcie x1 or old 32 bit pci? are you using any other pcie slots, like a x16 for the motherboard? are you sure you didn't unplug the usb 2 header that goes to the front case ports? you might have knocked it without knowing...

what exactly did u damage? the little round white/blue things? or one of the two rectangle black things? those are part of the processor power delivery system. the black rectangles are called chokes and they're used for filtering the frequency of power. and circles are capacitors and they're...

i am trying to make sense of the bus width and bandwidth of the intel hub interface (ihi) that connected the g/mch and ich4 according to the official intel spec pdfs: http://download.intel.com/design/chipsets/datashts/29074201.pdf...

3ogdy is right, the noctua lh-9i is only gonna work with intel sockets lga1150, lga1155, lga1156 but most aftermarket coolers are better than stock amd/intel coolers. just get one with a nice big heatsink and a good connection between the surface that meets the cpu and the heatsink fins

take a look at this post http://www.overclock.net/t/1352370/just-overclocked-for-the-first-time/10#post_19114472 your motherboard has a 4+1 vrm setup. meaning 4 phases for the cpu power and one for the IMC (integrated memory controller). so, if you do end up getting one of the new fx chips...

everyone says that the new amd 9-series chipset brings support for the new am3+ cpus i find this troubling because the 9-series are the EXACT same as the old 8-series except with hypertransport 3.1 support instead of only 3.0 now, most motherboards that had 8-series chipsets needed a bios...

hey pinhedd, thanks to you i found some more information i read this the other day after reading your post http://www.xbitlabs.com/articles/cpu/display/p4-2400c-oc.html so the sad thing is i cannot take advantage of the better overclockability of the d1 because i'm using a dell motherboard...

first let me introduce the thread by saying i have a dell dimension 2400 bluford mobo with the intel 845gv gmch/chipset and pga478b cpu socket i have a couple cpus that will work in this socket: 2 different stepping 2.2 ghz p4 and a 2.4 ghz celeron on this page it shows all the different...