Recent content by iamtryingtogetraidtowork

https://www.bh.ae/ScreenshotDiskManagement.jpg The Drive 1 is an in progress clone to a USB Enclosure. Drive 0 is one I am on now and there is No drive actually installed in Computer https://www.bh.ae/ScreenshotDiskManagement.jpg

USAFRet Sorry I was a bit vague. Well I had the RAID 1 set up. I then at some point removed 1 of those SSD's (NOT M2) and that meant I only had 1 Drive left in as RAID 1 (but at beginning showed as Critical when booting because it missed the drive I had taken out). Then for some reason it did...

I used EASEUS software to clone. I have SATA now set as AHCI

NightHawk. 1. Nope was a clone on the same computer's C drive. 2. Dont know whether is a "TO GO" to be honest. I have a small Raid Sonic Enclosure for the M2 NVME which as I say I can Boot from, but when I take the M2 out of enclosure and out it onto the Motherboard it wont Boot,

USAFRet , 1. This was a clone of the C drive from same computer. 2. MSI B450 TOMAHAWK AMD Socket AM4 Motherboard

I installed a fully cloned Samsung M2 NVME SSD including Windows 10 operating system ,into the M2 on my MSI B450 TOMAHAWK AMD Socket AM4 Motherboard . It would not boot and gave number of options none of which would work. I then took M2 out and put it into a good M2 USB enclosure I...

I should say that I have noticed since I REMOVED BITDEFENDER from my Raid 1 System I no longer get the "RAID 1 IS CRITICAL" message and all shows as normal. So I can only assume it was the way Bitdefender works (and/or was MISworking) that caused the "RAID 1 is Critical" message when booting up)

Yes both SSD's are exactly same. I am on latest Windows 10 Professional 64 Bit and have installed latest update somewhile ago. However as for Raid since i got the system 6 months ago when I boot up sometimes RAID shows as Critical ,and then goes back to Normal if I reboot. Strange, but wonder...

I have 1 TB SSD (Raid 1) running on Windows 10 64bit .I had installed Bitdefender Internet Security for about 6 months say. At beginning I had loads Free space, but then gradually seemed to fill up and then found I only had 80GB left then 15GB I could not get head around why ,even though I...

Thanks. I looked but doesn't support AMD Raid by looks of it. I'm running Windows 10.

Table 8. Array States State Description Normal The Normal state is displayed when everything is functioning correctly. Ready The Ready state is displayed while an array is being created. WHY would a disk drop from "Normal" TO "Ready" ?. Both disks show in same array and in green...

I suggest you download STELLAR DATA RECOVERY programme if necessary. By the way, I have pretty much same situation to a degree, in that I have the same enclosure. It had 2 HD's in it working fine on Raid 1. I then replaced those with 2 X SSD's in cages that make them 3.5 inch size and put them...

OK I have got the 2 disks showing as "online" in green letters in Raid Bios as a RAID 1. Booted up and showed Critical message again. So left it turned on for 1 hour and rebooted and showed message "Normal" (instead of Critical) ..So for all intents and purposes it is all OK. But now I shut...

Yes I know which drive. I have initialized again (after scanning both drives and the result ok) and assigned it to the other drive so now I shall see whether it comes up critical again.

Hello, Yep that is what I did but it says "S.M.A.R.T not supported" .Also tried Samsung Magician and same thing.