Recent content by Jirachi

Ok will try that. I think i also should mention this is not always the case. Sometimes it works just fine from the beginning.

Hey, I run two R9 290's Tri-X In crossfire. When I boot my PC, the fans of the bottom card doesn't run. When I do something in afterburner, they do run (dunno if they run because of me playing in msi afterburner or if it is something else). Is this normal..? G45 Gaming, i5 4670k, 2x4GB ram...

In the vcore mode i can choose between auto(default), override mode and addaptive mode. So, override mode is the way to go?

Im planning to test stability for 8 hours with Aida64 with Stress CPU, Stress FPU, Stress Cache and Stress System Memory left on, as default. Is that a good way to test stability? I have CPU Ratio Mode on Fixed mode and Voltage mode on override mode. When I check CPU-Z I see 1.2V and it stays...

Ah, thanks. I think i only can get 4.1 GHz stable at 1.2v.. That is really bad right? I have now 4.3 GHz at 1.27v stable.

Hmm, I don't know if that is true. I learned from LinustechTips Vcore can only affect lifespan if you go past a certain point. I dont know what to believe.

But is 1.3v too high? I see a lot of people saying 1.3v is fine and even 1.35.

Couldnt drop. If i drop it to 1.29v, windows starts amd aida64 pasts for 15 minutes. But bsods on ITB. Specs: I5 4670k with Noctua Nh-D14 2x 660 Ti AX 860i Z87 G45 Gaming 2x4Gb vengeance LP 1 ssd, 1 hdd Using bios. Fixed. Offset idk, havent changed anything about that. Using Intel Burn Test...

Now Im at 4.4 GHz stable with 1.3Vcore (normal chip?) max temps are 78 degrees. I wonder if I can try to go to 4.5 GHz and increase the Vcore. Is it safe to increase the Vcore as long I stay under the 1.35?

As my mobo and cpu supports overclocking, i want to give this a try. I want to overclock my 4670k, but i dont know the bios settings before i am going to oc. I cant manage to adjust the v core voltage FOR EXAMPLE. Can someone tell me all the settings i have to change exactly? I have the MSI Z87...

Ok found it. Sata mode wasset on AHCI mode and NoT RAID mode! Whats wrong?

I disabled rapid start and smart connect but couldnt find raid. It is still showing as 2 full drives. Im 100 percent sure I only have 1 HDD and 1 SSD! Where to find raid in bios?

So, today I did somerhing with RAID on my computer. I opened raid, and selected rapid start technology. My computer started to restart for 3 times. Once succeeded, i made up i dont want and need raid technology. So, i thought, i have to reinstall windows. Now i am in the stations screen when you...