Recent content by Jnelly99

Hello, yesterday I was uninstalling some programs from my computer that I didn’t use anymore. I seen I had a program called diffmerge and when I was uninstalling it my screen just went black but was still able to move my mouse around. It sat like that for about an hour until I decided to reset...

I didnt know that, thank you. Guess i wont take apart my gpu then, you saved me a lot of trouble

Really? Even if its hot to the touch? And thats with OC on it too, not much tho

Specs: Gpu: Gigabyte gtx 1080ti oc cpu: i9-9900k Mobo: Asus Rog Strix z390-E While playing modern warfare on my new pc i built with a custom water loop i noticed my gpu temp avg. 55 degrees and is really hot to touch, is this normal temps for a gigabyte gtx 1080ti oc or not? i use artic thermal...

I figured it wouldn't be worth it, i think i will just go with a off set on the cpu instead, i dont do much besides game on my pc and stream once in awhile so im not stressing the pc that hard. I will be getting a higher watt psu tho just incase. Hoping i can cancel my cable mod cables now tho lol.

So would delidding be worth it? I dont want my cpu running at 90 degrees all the time im fine with doing like 4.8 or 4.9 and having it under 90 degrees then 5ghz and have 90degrees all the time. I have never delidded before but have watched videos, maybe not worth it right now on my current cpu...

Yea i use my computer mainly for gaming and streaming, i will do a fully stress test with aida64 and see how that goes then with 4.9ghz. As for vrm's i was not monitoring the temps for those, and not sure how to adjust them in bios, i will look up some info and try that out too. hoping i can get...

yes only running prime95 and small fft with avx disabled and only gettting 80 max at 4.7ghz 1.25 volts, so when i was running it for 15mins at 4.8 and 4.9 and getting 100 degrees max is normal then?

Thank you that makes sense, im hitting max 80 degrees with prime95 running still so i should be good with the cooling in my system as it hasnt gotten any hotter and seems to be stable, i believe 4.7ghz at 1.2 volts is working good. Thank you for the information

well after doing some prime 95 testing i have it down to 4.7ghz as 5 was not stable right off the start of the torture test. So far its not crashing on me only 2 hours into the test tho. 4,9ghz and 4.8 was stable off the start of the test but temps were up to 99-100 degress after like 15 mins...

I got air flow over the vrms, got 7 fans in it and air flow seems to good. As for radaitors i got 2 360mm copper radaiators but they arent really that thick maybe like 2-3inches only, i thought that having 2 360mm with a alot of surface area would do about the same as 1 thicker one but i guess i...

Specs: Mobo: Asus ROG Strix z390-E CPU: i9-9900k GPU: Gigabyte gtx 1080ti PSU: 750w Ram: 32gb 3600mhz So i just finished my first custom water loop build and first build with the i9-9900k. This is going to be my first time manually overclocking and wanting to get the most out of my cpu with out...

Lol yes i read online that most people do just sucks bc i did a white and gold build and theres no such thing as a white clear coolant :(

pump is running i can see it spinning when the computer starts up, and yes im using a distroplate as a reservoir the pump is in the distroplate. About to do a stress test now, i was playing the new call of duty and temps only get up to about 47-51degress, which i believe is good nothing...

So i just finished my first custom water loop with petg tubing, while filling up the system i had some troubles with the water not flowing anywhere because of trapped air, well i believe i got it working as the system is filled up fully now. But problem i got is, im using white pastel water and...