Recent content by JustKun

Are all the ram sticks the same brand and speed? Because crossing brands can cause issues.

Don’t worry about it staying at max clock speeds. You have nothing to worry about. It just means that you either a) have high performance power plan enabled or b) have something running in the background.

It’ll work there might be a small chance that the ryzen 5 1600 will be a bottleneck for the 3070 because a 3070 is faster than a 2080 ti

A gpu bottleneck isnt really an issue because the cpu prepares everything for the gpu and the gpu will render out the scene. If you get a zen 3 cpu, that means your cpu will have a higher fps limit that your current 1050ti can’t keep up with but if you decide to get a higher powered gpu in the...

I have the same cpu and I think the stock voltages are just too high in my opinion. If you want you can run the cpu at 4.2ghz at 1.275 or 1.3 volts (I have mine at 4.1ghz at 1.2375 volts with the stock cooler) by setting it in the bios for better performance overall. As for the stuck cores...

Try to reset the bios settings because it seems like doesn’t seem like a windows issue. If you don’t know to get into the bios, just hit delete or f2 a few times when the motherboard logo comes up after turning on your pc. Once you’re in the bios, you can either manually set the clock speeds to...

Got it, thank you so much

Oh thank you! Can I use a sewing thread instead? Bc I have a ton of those.

Thanks! I appreciate it

Thank you! Should I run a stress test like OCCT for 5 minutes to make sure? Or just boot up the pc and let it sit there?

So I just bought a new cooler which is arriving in a few days and I see that some people rip the cpu out of the socket when they take off the stock cooler. What are some precautions I can take to make sure that this doesn't happen to me?

I am currently somehow running 4.2 ghz all core at 1.25 volts. Gaming temps are around 58-65°C so I consider this a win. The stock cooler isn't too bad. I set it to go up to as high as 80% fan speed until the cpu hits 90°C and then the fan goes to a noisy 100%.

So when I was messing with my cpu, I found that I still had a little more headroom while overclocking using the stock cooler. I kept bumping it up in increments and decided to try 4.2ghz at 1.25 volts. I ran a userbench and got 93rd percentile and a rating of 91% and I also ran a cinebench r20...

Thank you! I think I’m gonna limit the boost speeds and adjust the fan curve on the cpu to try and limit noise.

I’m going to do a pc build with a ryzen 5 3600 and I plan on using the stock cooler (wraith stealth). I’ve heard that the wraith stealth makes the cpu run hot and I don’t want my cpu hotter than 75°C and the fans ramping up and making a lot of noise. Do you guys think I can make it run cooler by...