Recent content by LeeSuperPosey

Is it not less effective without extruded heat spreaders ?

As I cannot turn on the computer without RAM, I selected my motherboard and gave me this result. But, this is what I'm looking for ? I'm confused with the results.

It was not the same slot than the first time. Indeed I also ask myself where the issue can come but my hardware is new and everything is working fine (when the RAM works aswell...). I waited few days with one stick of RAM and it was working fine. I swapped it from one slot to the other one and...

Hello, this is my setup. I had G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-6000 CL36 Memory but 5 days later, one stick of RAM stopped to work. I decided to purchase to same product. 5 days later, same issue and I sent it back again 🙃 That's why I'm seeking your help now, do you know what...

Hello, I recently purchased G.Skill Trident Z5 RGB 32 GB (2 x 16) DDR5 6000 MHz CL36. It worked fine for few days then one stick of RAM is not detected anymore in BIOS nor Windows 11. My mother board is Gigabyte Z690 UD AX BIOS update F6 and i9-12900K. I swapped RAM sticks: one stick does not...

I downloaded the latest version of the drivers from Intel. But when I browse the folder during Windows installation, there are none that are compatible with the hardware. EDIT: It was not correctly plugged in :geek:

Actually the BIOS found the nvme, that's mean is it correctly installed, right ? Thank you for the link, I will follow the instruction ! Anyway this is another topic, this one is solved :) Thank you so much all of you for the help (y)

No, I haven't tried them all. Just the top one (M2A_CPU) like you said. I don't really understand but I plugged it in the wrong slot ? From the manual:

Hello, I have just finished assembling my computer. I equipped it with two SSDs: M.2 NVMe Samsung 980 pro SSD Samsung 870 evo SATA SSD My motherboard is GIGABYTE Z690 UD AX, BIOS version is F6 according to BIOS updates. In BIOS menu, it shows: SATA section: Samsung SSD 87 (4000.7 GB) PCIE...

Thank you for you help and your explanations ! I chose the Arctic liquid freezer II 360. I assembled all the parts of the computer and it boots. Only when I want to install Windows 11 from a USB boot key, the NVMe disk is not displayed, only the SATA. So I'm stuck at this level of the...

I won't risk anything and I'm going for a SeaSonic 1000W, if it's a good one. Actually I dont' know, I'm a rookie. If you tell me "put x fans in front, x in top, this AIO and you won't have any trouble for years" I will follow the call. I don't mind about RGB, price, but I want to make it...

First, I'll change my PCU for >= 1000 W, you're right, thank you. About the catch 22 situation, is there still a "best" solution ? Since the graphics card has its own cooling system, would it make more sense to focus on cooling the CPU ? As the case already has 2 fans in front, if I go for a...

If we put the radiator in front for 420mm, the pump must be higher than the output of the cables from the radiator, right? Would it be possible for you to link me some of AIO you would pick in my case please ?

Hello, I'd like to know which AIO is suitable for my following configuration: System Builder. The ARCTIC Liquid Freezer II LGA 1700 was my first choice, but according to this article, my motherboard may have a compatibility problem. So I asked Arctic's support and still waiting for the answer...