Recent content by mantinziza

Ty that will work much better than trying to use what I got laying around. :D

I have a Hero Maximus 10 that I'm switching over too due to an unfortunate cmos accident, I think? Well I'm looking at some on/off/on spring toggle switches. Any way, I'd like to set it up so the upflick is, power on, and the downflick is the reset switch. However there is only 1 negative...

I’ve been working a lot with this lately, but I still need some help. I bought 2 new ram sticks due to thinking I fried my old pair, apparently I burnt out my cpu.... not my stocks, that’s another story. Any way my motherboard can handle 4 Sticks and I’ve only been using 2. I’d like to just...

The hotter coolant coming out of my cpu won’t effect the cooling efficiency of my mosfet? I like the idea of what your telling me but if I run it like that wouldn’t it make sense to go mosfet to the CPU since the mosfet runs cooler naturally than the CPU does? And the fact that the mosfet...

I’m currently trying to figure a cooling loop for my system. I have a great radiator its too big actually so it works great, but I’d like to try to avoid getting another due to it’s size and my space limitations. So I was trying think of a way. First of I plan on getting 2 pumps like this, I...

Your power supply could be the issue, I would use a 1000watt with that setup, even the 650 seems meh for a rig like that. Just barely getting by with the swapped parts.

That truly makes sense, Ive been useing this same processor for a long time, and I have multiple cooling rigs hooked to it over it "evolution". And the "heat spread pattern", (I guess that's the right way to say it, lol). Has always been the same between the 4 cores. Finally multitudes of...

My rig is delidded, and I have direct contact with copper/liquid cooler installed. The thermal material cant be dried, I just reapplied last week (thermal grizzly), I guess I could try to check and make sure that I have even pressure again, but considering the tools I used and the triple double...

I'm currently testing my overclocks and trying to find my best numbers but I noticed that when my computer is under a full load when using prime 95, I start to thermal throttle I get core0@ 68 C it never goes above core1@ 95 C never goes above that core2@ 105C which is causing the throttling...

forget it ill just get a new psu when the times right, thank you all for your input

I did stumble across this part, and i have read in other areas that people have had success with them. But i really dont want to fry anything. https://www.newegg.com/Product/Product.aspx?Item=N82E16812200459

I have an old corsair 750 watt psu model: 75-001447

I have an old z77 oc formula that has a 12volt 8pin and a 12 volt 4 pin next to it. I do not require the 4pin according to what I have learned, but It would help me tremendously to oc this board, My psu power wise is more than capable of handling the demand, however the connections are not...

oh its broken, but oddly enough I was able to use it to help me frame in an old I5 that i de lidded, made it easier to check the direct contacts without worrying about scrwing up a good part, lol i had lieing around with out having to worry about screwing that one up, kinda stinks i lost about...

well Ill find out in about an hour, thanks for your answer. If it's broke, well at least it isnt a super modern day processor, just sucks because i was really excited about getting my computer back up and running and the rest of the parts I needed got here just today..... Oh thankyou bad luck...