Recent content by manugargagg

now my updated config will be 8700k asus h310m-e kingston ssd 120gb seagate hdd 2 1TB each gtx 1050 ti 8gb ram ddr4 cooler master H410R cooler master mwe 80+ psu 550w or Cooler Master MasterWatt Lite 500 80 plus EU

i am just trying to replace mobo, processor, ram everything else i have in my old system i am just trying to upgrade system for gaming.

i am planning to build a pc with 8700k but not looking for z series motherboard right now because in future i will upgrade to maximus hero or code so i am looking for a cheapest motherboard which will not allow me overclocking and stably run 8700k

hello, i am planning to upgrade from i3-4150 to i7-4790k is it a good idea to upgrade cpu on H97m-d3h Motherboard? motherboard is almost 3 years old.

Hello, suppose i have a rig that is consuming about 500w of DC power as per the PSU specs and the Total PSU power limit is 750w gold or higher rated. my question is while gaming if my pc consumes 500w as per the dc wattage how much watts will it draw from AC side. how much power it will...

i was experiencing sudden reboot and it reboots until i shut down it for at least few hours. so i decided to find out which part of the computer is faulty for which its suddenly rebooting today i found that my psu voltage is going low under high load. its dropping 11.59 as far as i could test...

i have a system 4th generation core i3 with gtx 1050ti i am connecting primary display with GTX 1050ti graphics card and other via display port of motherboard is it a good idea to do this..

actually i reset the cmos using the same way but still the problem comes due to this ram. i remove the crucial memory and i am now using kingston which is working fine. i think that is not an unsupported memory that is a defective piece which i have got.

i don't think that i need to reset the cmos because i have checked out the Memory Support List in Gigabyte and there is no specific memory supported... http://download.gigabyte.asia/FileList/Memory/mb_memory_ga-h97m-d3h.pdf

how to clear cmos or is there any risk clearing the cmos?