Recent content by mgBride

Good Call! Nothing in the manual indicates any interaction between the M.2 and SATA ports... but moving to SATA 1 (and SATA 2 for the original drive) has solved the read-only issue! Thanks!

I have an EVGA Z690 Classified MB with an i7 12700KF CPU, 32 Gb Trident Z5 DDR5-6000, EVGA RTX 3080 Graphic Card and a 6 Tb WD Red NAS drive. The system boots and runs on an M.2 but the HD has been set to read only... I thought it was a HD issue, so I replaced the HD with a second WD Red NAS 6...

That's correct. The drive is currently in this computer so that I could format it... thinking it may help. I will try first and third slots... Interesting... first slot - Went to BIOS setup! Third slot cycles 7F - 07 - 00 - 28 - 26 - 04 - 7F

Just tried it again... single in second slot - 26, single in fourth slot - A9, other module in second slot - A6 (recognized RAM change), other module in fourth slot - A9

Did that - no change... I will try again though as I don't recall if I changed anything else since I tried that... Pulled the M.2 and got a 26 code...

System: EVGA Classified Motherboard G-Skill Trident Z5 DDR5-6000 2x 16 GB Intel i7 12700KF EVGA 3080 FTW3 ultra WD Black M.2 1 TB Noctua NH-D15S Cooler Corsair HX1000i PSU Lian Li Case System hangs at A2/A6/A9. I have reseated the GPU, replaced the GPU with a ROG 2080, removed RAM, reseated...

System details: CPU: Intel i7-7700K 4.20 GHz MB: ASUS ROG MAXIMUS IX CODE RAM: Corsair Vengeance DDR4 2133MHz (4x16 Gb) GPU: ASUS STRIX GTX 2080 SSD: Intel 600p Series 512 Gb HD: Seagate 2 Tb BarraCuda PSU: Corsair HX1000i Modular Cooling: Corsair H115i Liquid CPU Cooler Case: Corsair...