Recent content by Mister-E

Indeed, I've fixed their positions and it is working again. They were only of by 0.5 or 1 mm so I didn't noticed it at first. I've send the pictures of the cpu socket to somebody, and he noticed it. Glad it's working again :D

It only has 2... found the problem tho.... 3 bent pins!

Not the answer I want to hear, but it is the answer I expected... :'(

Do I have a defective ram slot? Whenever I place anything in slot 2 and I boot up the system, the Memok! Light is a constant red light. I've tried: 1 stick in slot 1, pc works fine 1 stick in slot 2, no boot 2 sticks, no boot Tried the memok button, no boot Tried cmos clear, no boot With 1 mem...

My 3570k is running at 4.5ghz with a +0.065v offset. I've tested with: Intel burn test 50 passes Prime95 12 hours Then I ran some Valley runs, although this is for gpu's, I does give you a stability checkup. Google where to download them. Main thing is to monitor your cpu temps with...

Hdd max when used 40c? They don't do much in my pc so they are mostly on standby. ARon leeds, what do you think of the cryorig?

I was choosing between them as well, choose the Define S. Got 3 Fractal Venturi 14's in the front and 1 stock exhaust. The intake fans I limit on 1000rpm, the rear can only go 1000rpm. I now have a positive pressure inside the case which works quite well. I think adding s bottom fan would be to...

The reason why they are there is to reduce 'noise' on the cable. I removed mine from my pcie cable's of my corsair RM850x. No problem at all. http://

At the moment I have the following fans: 2x Cryorig xf140 2x Noctua nf-a14 industrial 3000pwm 3x Fractal Venturi hp14 pwm 2x Fractal GP14 My current setup: Front intake 3x Fractal Venturi Rear exhaust 1x Fractal GP Cryorig R1 2x Cryorig xf140 Intake at max is roughly 240cfm Exhaust at max is...

After my first build I had the same problem, it was one of the single cables from the case buttons which was on a wrong connector (reset one I think)... if you just put the entire pc back together... i'd suggest checking all the wires again.

Did you try the sticks in multiple slots?

I have 3x fractal HP 14 pwm fans, which are static pressure fans. I think these would be good enough for the job. I looked for thicker rads but they tend to be to wide. Max is 140mm wide. Gpu I don't know yet, cpu is an i5 3570k, at the moment @4.5ghz

I'm thinking about watercooling... I have a define s, which won't allow me to fit a 420 radiator in the front, but it does have 440mm space, so 3x 140mm fans easily fit. Then I got an idea, which is; 3 x a 140mm radiator in the front, at a 90 degree angle, so the in and outlet is on the side. I...

Totally true, except, buying, tweaking and optimising is more fun then waiting :p. I'm guessing most on the forum are familiar with that :D

Okay, skipping the 970, I'll wait... sigh....