Recent content by MYTHOZ

You should probably get more storage than that. You will fill that space up pretty quick if you will be using RAW image files. Unless you're going to use external storage. Burning them to DVDs is not ver efficient.

and why not???

I read an article or two recently that monitors are about to drop about 30-40% sometime this year. Can anyone confirm this?

check to see if the video card is seated well in the slot

If you're doing 3D rendering and lots of 2D applications from Adobe then really there is no perfect card for that and gaming. I do this kind of work as well and run 2 separate systems. The one for work uses nVIDIA Quadro FX 4500 for a video card and for the gaming computer I use 7900 GX2. The...

Really low score. I get just over 8300 on my system running 1024x768 resolution in the benchmark. Opteron 170 @ 2.4 Asus A8N-e 2 Gigs Kingston HyperX 3200 Single Nvidia 7900 GX2 at stock settings

Cad is mostly processor and memory driven. And yes, a Nvidia Quadro card would have been a much better choice unless you game in spare time as well.

I am running a single GX2 card on y non-SLi board and it is great. 2000 points higher than my 7900GT in 3DMark 06 The card takes 2 power cables so it does take quite a bit of power. I'd say 500W or higher will do.

most likely a dead motherboard possibly because of a power supply

I have a chance to upgrade to 7900GX2 card from my 7900GT. I will be using only one of the GX2 cards not a quad Sli setup on an Asus A8N-e motherboard. Will my motherboard run this card? Is GX2 more like the 7900GTX in Sli mode? Will I see a considerable difference from this upgrade?

what is the rest of your system?

no

try the memory in single channel and also make sure your memory is compatible

Legit as I think it is possible that other ram may be covered under the heatsinks. The 2 sets are built 10 months apart and seems like overclocking has to be reduced to make them run. It also boots in 333mhz if I set it to auto on the memory divider so I need to manualy change it to 400 (if I...