Recent content by nerroseu

Dammit. That would surely be a pain because I don't live in the US and I bought it from there. Will contact amazon support.

So I've finished running Memtest 86 with the new Patriot Viper RGB kit and I am starting to suspect the RAM may be faulty. With XMP settings off and RAM is set to Auto (2133MHz default speed). Memtest 86 doesn't show any errors after 3 passes. However, if I go to increase the frequency any level...

I performed 2 successful passes using Memtest86 with the intial Patriot Viper Series 16GB kit. I set the memory speed to 3000MHz. Using the same frequency, I performed the test using the new 16GB kit of the same memory and encountered a series of errors immediately off the bat. The test is...

It just seems strange that this RAM kit would respond so different from my the exact RAM kit I have, I'll perform the memtest 86 to see if it may be potentially defective.

I've just bought an 8x2GB Patriot Viper Gaming RGB Series for my PC rated at 3200MHz, However, I have encountered the issue of the PC not loading into windows 10 (BSOD) with any DRAM speed faster than Auto (2133MHz). I've played games with the Auto Speed for some time with no issues. This is my...

I recently bought an ASUS X399 Gaming-E motherboard and planning to pair it with the Threadripper 2950X. I have not bought the CPU as yet and do have a feeling that the BIOS isn't updated to support the TR2 out of the box. I know that you can use BIOS flashback to update the BIOS without needing...

I'm in the process of finding a donor GPU, however, though the problem may be a defective GPU (I have the GPU about 6 months now), I saw no artifact-ing or any strange video flickering and other behavior during any of my activities. Especially gameplay. Using MSI afterburner, GPU temperatures...

Goodday, I have recently encountered an issue with my PC and I am at utter loss how to troubleshoot it. I don’t want to call a technician just yet. My PC screen and audio cuts when I first switch on my computer and it is now booting up (approximately 2 minutes into booting up while loading GPU...

I reran cinebench R15 @3.8GHz and the value jumped to 1645cb but it still seems low. Any suggestions as to what I should monitor again or adjust? Is there any possibility that this can be due to a faulty power supply.

I increased my CPU clock speeds at 50MHz intervals and the following Cinebench R15 results are as follows: - 3.6GHz = 1563cb 3.65Ghz = 1582cb 3.7GHz = 1605cb 3.75GHz = 1618cb 3.8GHz = 1626cb I adjusted my VDDR CPU Voltage to 1.341V and the VDDR CPU Power Phase Control to Extreme. I ran...

I will try increasing from stock clocks at 50MHz intervals and running CB and share my results later. But what can cause a power-envelope throttling?