Recent content by Petepp69

Thank you for your reply. Yes I am plugged into my gpu. I used both my dvi and a hdmi cable on my gpu and I tried using the one on the board just as a last effort to see if anything happens.

Thank you for responding and sorry for replying very late, Had a long week at work. I will try doing it that way instead of just removing the battery and I will reply with my results.

I have a spare parts build so everything works, and I swapped every component out with my main build and can confirm that every part works other then the board and I am still having the red VGA led. Today I finally had the time to trouble shoot and I cleared the cmos by removing the battery and...

So a friend picked up a HP omen prebuilt from amazon and it just came today and inspected it, upon receiving it he noticed a screw missing and asked me what it was and it was the screw to one of the VRM heatsinks. He does not mind seeing if he can source a screw himself and just slap it in there...

Ok turns out I did not have corsair link 4. I downloaded icue and every time I went to get cl4 i got icue instead? Im gonna fiddle with it later, Im still trying to the Sli issue im having and another thing is when you upgraded to ryzen you said you came from a fx series, so did you buy ram that...

The aio is 4 and the fans are 3. I never got this error on my old bord tho. (Asus z170 pro gaming w i7 6700k)

I tried Uninstaller and reinstalling but I was having this issue before I even installed the drivers for it

I tried to set the pump curve manualy but I cant then i tried the extreme setting and that dose not do it either.

Thank you guy for responding! Im gonna test things out in the morning and sorry for replying much later I just went to sleep due to frustration with my whole system giving me as many possible things to go wrong with. BTW does anyone know how to oc ryzen and enable my RAM to go at the rated...

Ok im going to try that in the morning but I did set it to run on the extreme mode but ill set things manualy.

View: https://imgur.com/gallery/mAXxv4Q At Idle with side panel off, no oc to a r5 1600af and with 3 120mm fans blowing over it, The fans on the rad are around 1440 to 1500 rpm, the pump in 1770 rpm and Temp was just under 30c

View: https://imgur.com/gallery/AYFgpBr Im pointing to the top one and it is slightly warmer but the bottom one i think is just colder because of airflow from the fans. I just let it sit idle for 15 min with the side panel off so heat from the gpu's wont affect them .

I tried all 3 on the top and I still got the same error. I can try it again but I rand through several boots with them plugged into each one.

I keep getting this error when I boot up View: https://imgur.com/cLVLTPK The solution to get it to boot skipping over this was to set in the bios under the monitor tab cpu fan speed to ignore View: https://imgur.com/xlXg954 But I really want to overclock and im having issues with it not...

View: https://imgur.com/a/rJv5yLz