Recent content by @root

I have increased all the fan speeds of my case fans already. Still not much improvement or if at all. So you are saying that the high cpu temperatures I am experiencing is due to my graphics card being below it? Then how come I see so many tech gurus and other people having their AIO's top...

I have tried removing the Antec’s plastic front cover but could not get it to come off. So instead I took off the tempered glass side panel off and it didn’t seem to drop the cpu temps. I have reseated the pump, applied thermal paste twice now and tighten the pump screws more. Still no...

Specs: i9-12900K (stock) RTX 3080 TI 360 EK AIO (top mounted) Antec Dflux 600 Case This current build has a top mounted 360 AIO at the top of the case. At idle the cpu temperatures are around 34C. When gaming the max cpu temperature I get are around 67C-80C. I have applied new thermal paste...

I have an EK 360 AIO RGB. If I remember correctly the manual says that the pump goes into AIO_PUMP header and I think the fans should be in CPU_FAN header. But yeh the splitter controller PWM not working. Cannot adjust any fan curves and it feels like it stuck in DC mode even after changing to...

Nah the AIO didn’t come with its own controller. The 6 fan model does though. Hence why I bought the deepcool controller but can’t get PWM to work even though on the box it says pwm controller. Nobody know why it not working? Anyone have used this controller in the past and got it working before?

Is there something wrong with plugging the 3 AIO fans into the controller then plugging the controller to my motherboard’s CPU_FAN header? I still haven’t found out why PWM not working?

The controller did not come with any sata power cable. It only has a pwm cable which I plugged into the CPU_FAN header on my motherboard. I’m pretty sure I done everything right that why I can’t figure why pwm does not work?

Just bought the Deepcool FH04 pwm fan controller. I plugged 3 of my aio fans which are all 4pins into the controller ports 1,2,3. Switch on my pc and went into Asus bios to change it to PWM mode then realised adjusting pwm fan curves did nothing. Which makes me believe the controller is in DC...

I have a Windows 7 disk that my friend gave me. I been using it for many years without issues on my old computers and have upgraded them to Windows 10 activated. Im wondering will I be able to install Windows 7 on new Alder Lake build? So I can get a free upgrade to Windows 10. Also how would...

I just finished building a new computer. I installed Windows 10 and activated via command prompt doing the KMS method. I have heard that this can be dangerous and make my system vulnerable as you are connected to their server. 1) I was wondering how I can remove everything linked to the KMS? I...

Anyone know? :s

Specs: Asus Rog Strix Z690-F Lian Li Lancool II RGB Mesh Case Lian Li Bora Controller I don’t think my pc case comes with a controller hub. So I bought a controller separately. I plugged the 3 x front mount radiator fans into the controller. Then from the controller to motherboard I have the...

Because 1000w is good for me. But what does it mean it says 8/6pin cables? Does this power supply have 3 seperate pcie of 8pin cables? My graphic cards need 3x8pin power. And need 3 seperate cables running to it.

1) Does anyone know of a high quality 1000w power supply around $220USD for mainly gaming and overclocking? Will be running 12900K and RTX 3070 ti. 2) Been looking at the Seasonic Focus GX 1000 not sure if good or not, but does this psu have 3 seperate 8pin cables? My graphics card needs...

If I wanted to game and stream just from the same computer do you reckon this specs will be able to do it without any issues, not lose any quality and fps? i9 12900k RTX 3070 ti 1000w power supply 32gb of ram