Recent content by shemsureshot

Thanks everyone for your help. I ended up resetting the cmos via the header and it is now able to update the bios. This guide helped me: View: https://youtu.be/fGpf_hfOKgI?si=NvVE1laOg_klVFSa

Hi, I’m using a usb 2.0 drive formatted to fat32. I also tried a usb 3.1 drive with no difference.

Thanks, I just tired that but unfortunately didn’t work. The motherboard model in the video is different to my one. My motherboard says “there is no image file” even though I created one and named it how it says to in the manual.

Hi. I’m using the ryzen 9700 x CPU and have tried flashing from the bios using the instant flash but it says there is no image file on the usb (there is an image file on the usb).

I have a Asrock B850i motherboard with bios version 3.15. I’m trying to update it following the instructions in the manual. I’ve renamed the rom file PSPBIOS.IMG and placed the BIOSUBU.BIN with is on the drive. When I try to use the flash button nothing happens. There is no LED like the manual...

I think it’s still an issue. What you described is my experience with the 7600 and x670e Crosshair hero motherboard I recently built.

Thanks. I tried emailing them and a few cable mod companies but haven’t heard anything back just yet.

Hi, I’m looking for a 12VHPWR cable for the Antec Signature Titanium 1000w which I would used to connect it directly to a RTX 4090 FE. I can’t find a cable specifically for Antec Signature power supplies but I have read it is a revamped Seasonic Prime power supply. In that case would a Seasonic...

Thanks for your advice Darkbreeze. The retailer tested it and they confirmed the power supply is not powering up their PC either. Its unclear why this problem occurred. They issued me with a full refund which I used to buy the Antec Signature Titanium 1000w and can confirm everything is running...

Thanks for getting back. I have the overclouding switch connected to the power supply but never used it. I have tried the switch and it makes no difference. I noticed the LED on the switch does not light up at all, which makes me think it is not receiving any power. This in itself could be a...

I thought to show images of the motherboard lights that do come on. This is the only evidence of any power, everything else remains idle. Apologies for the low light.

Thanks for the reply. I tried jumping it with the case connectors disconnected and unfortunately it still didn’t start. I couldn’t do the paper clip test because all the cables are black on the bequiet power supply cables and I don’t have a multimeter. I did try powering it on with the GPU and...

My system: Asus X570 Dark Hero Ryzen 5950 CPU 2 x 32GB DDR4 3600mhz Corsair Vengeance Ram Palit RTX 3090 GamingPro Dark Power 12 1000w PSU Phanteks P600s Case Windows 10 LG CX 48” Oled Display (HDMI 2.1) I tried turning on my PC today and there was no response when I pressed the power button...

Thanks. I don’t think there is an official screen protector. I wanted to know if anyone else was having the same issue because my one becomes very hot on the top right side of the screen which is why it comes off.

Hi, I have the 256gb steamdeck and I’ve fitted a brotect anti glare screen protector. I’ve fitted it perfectly with no visible dust or bubbles. However, when the steamdeck becomes warm while gaming the screen protector peels off. I replaced it with another and the same issue happened again. To...