Recent content by Tr4ck3r

I bought a new psu and everything seems fine so far. Is there anything I can do for the old psu? Or I should just trash it?

Update I shutdown the pc using the cooler master power supply and unplugged the power cable from the ups and when I tried to turn it back on the psu clicks and nothing happens. Guess I will have to buy another one. Cheers.

Actually never ran Furmark or Prime95, when the issue started happening i tested with cinebench and heaven benchmark and the cpu never went above 60 (4.3Ghz all cores 1.2V) and the gpu never reached 70 (undervolted) Also I played God of War for hours on high settings and the temps were chill and...

The psu works with the other system as I mentioned, but it doesn't even start with my system even when I use only cpu and one stick of ram (assuming it doesn't give enough juice).

Yes it has dust filter and I clean the pc regularly, so dust is not a problem.

That's weird because the Cooler Master is relatively new and my pc is always hooked to Ups. When I had the random shutdowns, event viewer reported critical power errors (kernel , code 41). Sad thing is we have no warranty or RMA in my country. Thank you for your response.

Hello good people. I am experiencing a very strange situation where my pc started shutting down randomly then never powers on again until I disconnect the power cable from the psu and give it few minutes before it starts again. After that, it started happening daily and I have to go through the...

I contacted MSI support and they said that I can install it without any problem. However, it did not solve any of my problems. Just another random bios update with extra gimmicky features we don't need.

anyone?

Hey guys, I just checked my latest board drivers and I found that the latest bios is AMD Combo PI V2 1.1.0.0 BIOS If I flash this version, will my ryzen 3 3300x cpu keep working, because i was wondering if this is the update that allows 5000 series to work on b450 . If yes, I won't flash it. PS...

Update: I bought the 8gb stick of the same model, and they are both running in dual channel at 3000mhz.

So according to what you are saying, They will both run at 3000mhz but still perform in dual channel mode?

So I should be getting the same exact model right? with same speed?

Hello guys! I have 8gb of ddr4 adata xpg d41 3000mhz. And I want to upgrade to 16gb. However, I can only find the 3200mhz of the same model (D41). Does it work? If yes, are there any disadvantages when it comes to speed or dual channel mode? Thanks