Recent content by youngrob

After both reseating the GPU and re-installing steam, it seems to work now...

Got any other ideas? :( The grey screen has stopped but I still get massive freezes and stuttering in games...

Hi! Thanks for the reply, I tried the thing and disabled the MPO thing. Didn't work though.

Hi, I've been having these troubles for a while now, its not technically unusable but it is so very annoying. GPU: AMD Radeon RX 6700 XT RAM: HyperX Fury RGB DDR4 3200MHz 4x8 GB Storage: (C:) Kingston A2000 1TB NVMe M.2 SSD; (D:) Seagate 2TB - HDD; (F:) Seagate 1TB - HDD; (H:) Crucial®...

It is already really stable :S

1. Yes, before I mounted the waterblock the backplate could move, I know the temps are not awful but they are exactly the same as when I hade the stock cooler. 2. The screwes are thight enough, cant screw more and if I try press on the waterblock any more the mobos starts to bend. And yes i did...

Hey guys Just got a H60 cooler for my cpu, the thing that bugs me is that it gives me the same temps under load as the stock cpu cooler did. This cant be right, right? What can i have done wrong? I mean, the thing goes from 40C to 70C just as i start the stress testing, (Using HWmonitor, using...

So, I grew tired of trying to figure out what had happened to my pc so I just went to a store and asked them to figure it out, after a week they told me it was the motherboard that had been malfunctioning, they however could not find what made my pc shut down, (they had done stress tests and...

it still turns on by itself after i shut it down

I tested the PSU thing and it powered on fine, and when i put it back into the chassi the pc started upp with the message "Reboot and select proper boot device" which i did, and now it works... for now Quite worried still

hmm, how am i to see if its the RAM? And when i am supposed to check the graphics card, should I take it out or can i leave it in when testing. Am a little bit wondering about the PSU, cause i can clearly see that i get power, the led around the power button is blinking as it should Also, i...

ok new problem, I wont be able to try those things cause i can no longer turn on my pc. When i try it just powers on, but nothing happens, no boot no nothing :(

1) all my drivers are updated 2) bios updated too 3) 1 year and one month :P 4) dont think so, cpu or gpu never get hotter than 50 degrees celsius 5) will check 6) will check 7) I checked one of them, shall i check all of them? 8) huh?

ok, so I tried the thing with the powerswitch but I then could not turn it on with the screwdriver. Also, my pc has begun to shut down randomly again What to do now?

Do I have to unplug the power button? Would like to refrain touching to many things inside the case in case I ruin something