1866 mhz

Hi there, i recently upgraded my PC ram from 8GB to 16GB by adding another 8GB stick, using the same Ram module from the same buyer. and changed my Mobo from ASROCK N68-VS3 to GA-970A-DS3P. i made those changes without reinstalling windows, the PC started normally all working good, i made all...

Im using a hyperx 8gb 1866mhz stick on a mobo that supports only 1600mhz(supports 1866 if overclocked(but im not overclocking it)). I also have a kingmax 4gb 1600mhz stick that I'm not using. Would there be any issue if I place the 4gb stick with the 8gb stick? I know theyre not the same speed...

I just bought another pair of G.Skill Aegis F4-3200C16D-16GIS and was in hope to double my Capacity. I pluged them in and enabled XMP. Which by the way worked for my earlier 16gb pair. So, i plugged them in and had Bluescreens with Errors like "Memory Mangement". There were many other BSOD's but...

Just slapped in my upgrade for the year (32GB memory) and ran into something i have never seen before. My speccy program thinks i am running my sticks at a much lower frequency than my BIOS and XTU does! My system is a bit older so my motherboard max RAM frequency is 1866MHz (increased from 1600...

Hello All, I recently purchased some new hardware components from amazon to upgrade my existing system. One of which being another set of Kingston Hyperx Fury White 8GB (2x4GB) 1866MHz DDR3 RAM , This was to be added to an identical set other than the heat spreader being a different colour...

I have a lenovo e41-15 laptop which supports upto 1600mhz 8GB ram. But i bought a 1866mhz ram instead of 1600mhz. When i install this ram the laptop is not booting. I thought the ram will be downclocked to supported frequency. I installed the ram in another laptop which supports high frequency...

Hello, I have an Asus notebook X550JX with 4 gb on-board memory, 1866 mhz, 1.35V. I just bought a 4gb ddr3L module with 1600 mhz and installed it. Everything seemed fine at first as in windows I could see I have 8gb of memory and the system was running faster, however every time I start playing...

so here is my problem my kingston hyperx 8gb ddr3 1866 ram (HX318C10F/8) only running at 1333 mhz on my motherboard which is asus p8h61-m lx3 r2.0 and i tried changing 1333 mhz to 1866 and 1600 mhz in bios ai tweaker but after changing it from 1333 mhz to 1866 or 1600 my screen goes black cpu...

I turn my computer on and it automatically enters power saving mode. It wont load anything at all. I have a dell windows 7 computer. I turn it on and both the monitor and motherboard's power buttons are yellow.. I have no idea how this happened or how to fix it. can someone please help me...

I apologize in advance for the mistakes I'll make, being not english. Recently, while I was playing a game, windows crashed into a BSOD and rebooted, giving me the "reboot and select proper boot device or insert boot media in selected boot device and press a key" error. If I reboot the pc after...