ami bios

Hi, I have an AMI bios motherboard - h310 micro atx - from amazon (not even sure what manufacturer... amazon link here). i5-9600k with 32 gb ddr4 ram. m.2 drive and no other hdd or sdd. I want to install windows via usb boot drive, but I cannot get into bios settings to select boot...

new build. white vga light on mobo, no post, no signal. MSI PRO B660M-E DDR4 PLUS GTX660 = POSTS OK MSI PRO B660M-E DDR4 PLUS R9 290X = WILL NOT POST (but it did before the bios upgrade, bios upgrade successful, bios downgrade successful, now no post issue :( I bought a new MSI PRO B660M-E...

My laptop have 988rPGA (idk why listed as 989rPGA in CPU-Z) socket. I already check the HM55 chipset capable to upgrade from i3 350M to i7 640M. I have already upgrade the similar laptop and it's going well. But this time it stuck at blank screen. The BIOS already updated to the last version...

I press power button the fan spins but the screen remains blank/no image. After 20 seconds there is next beeps sequence: 2 short, 3 long, pause, 3 short. After pause there are sometimes 2 short beeps instead of 3 short. I cannot find any beep codes in the manual and a google doesn't show it...

I'm working with an old Supermicro X8DTH-iF board and a couple of L5640 CPUs (it's a very budget project). I'm trying to increase the performance of the CPUs through BIOS-level configurations, and I'm also researching BIOS mods to enable me to change the BCLK of the processors. However, before...