argb cntroller

Hey guys, I wanted to connect all my RGB components either to my motherboard or my Cooler Master controller to sync it all but the RGB fans on my case don't have the typical RGB fan connector, instead they have this connector shown in the picture. What type of connector is it? And what type of...

Hi I have recently bought a case and the RGB remote worked as usual, but then I have tried changing the FAN lights with software and then I have learned that there are RGB headers on the motherboard because it was my first time building a PC with RGB fans and I have tried looking for the typical...

Hi i have question i hope get right answer. I have this controller below: and i have 10 fans + 2 cable argb + 1 gpu support argb the controller suppoort only 9 argb led but i can connect all in it 7 fan case in 7 argb led controller 3 fan cpu coller tie together in 1 argb led controller 2...

Hi, Ive got the MSI Z390 - A Pro and I need some help as I'm finding it difficult to understand when it comes to ARGB. Ive bought the following: Corsair Commander Pro core XT Corsair H100i RGB Pro XT AIO Corsair LL120 RGB fans. (3Pack) I understand that my motherboard has 12V rgb header...

Long time reader, first time poster. I've been building PCs since pre 286 days. I bought a 4090 and to accommodate it, I bought a PCIe 5.0 power supply (Thermaltake Toughpower GF3 Gold 1350W) so I didn't have to use the 16-4X8 pin adapter. I have the Thermaltake L20 GT case which has a fan...

I recently purchased a pack of 4 Cooler Master MF120 halo fans and 1 seperate one. The pack of 3 came with a controller. I hooked everything up and the fans all run fine and light up. But the controller is not detected by any software (icue, armory crate, aurasync, etc.) I downloaded the Master+...

Hi, I was working on my computer and by accident connected my argb hub that was 3 pin 5 volt, to a 4 pin 12 volt connector. it was also connected at the same time to a 3 pin on my motherboard with the same cable. I powered it on and there was a spark, but it worked normally. Just to be safe i...

Hello friends, I just replaced a failing AIO liquid cooler on an iBUYPOWER prebuilt system, and everything works fine except the aRGB on the new pump won't illuminate. The pump is powered by the AIO header on the motherboard, and its 3-pin aRGB plug is connected to an included 2-to-1 splitter...

Hello. Basically, I want to add RGB fans to my pc. I have MSI tomahawk b450 max and it has 4 x 4-pin system fan connectors and 2 x 5050 RGB LED strip 12V connectors. I want to know if I am able to do add 3 or more RGB fans to this pc with these connectors or do they only support normal fans...

I have a DEEPCOOL GAMMAXX L360 ARGB AIO which came with 3X CF120 fans(The ones without holo ring) and planning to get 3 more CF120 Plus fans(The ones with holo ring) will the lights in the pump and all these fans be controlled using Cooler Master MasterPlus Software if I purchase and use the...

can i connect any argb cpu cooler to my mobo sync and controll like all my other compo via aura/armoury specs: x370-f : ) Any help would be much appreciated...

i have ASUS ROG B360F motherboard with RGB port but my fan supports ARGB so how can i run the RGB lights provided in fan FAN model :- MasterFan MF140R ARGB https://www.coolermaster.com/catalog/coolers/case-fan/masterfan-mf140r-argb/#overview Motherboard model :- ASUS ROG B360F...

I've just recently ordered the Cooler Master MasterLiquid ML360R with included RGB LED Controller. My motherboard is a ASUS ROG Strix Z370-H which doesn't have any addressable or RGB headers. I'm not sure if I can use this product (even with the RGB Controller) as the fans included are...

hi guys, i built my PC two days ago and connected 9 white MF120 halo fans to the ARGB controller in groups of three, along with the argb of my aio pump (Deepcool Castle 360 ex Snow). using the argb controller from CM...

I have had some RGB issues with various cases/motherboards/fans /liquid coolers most motherboards these days have both RGB 4 pin header and a ARGB 3 pin header( currently using a ASUS TUF B365M-GAMING PLUS) my case came with one ARGB fan and a light strip on the front panel which are connected...

Sorry for a longer thread! Hello guys I do have a more specific question than those on this topic that I have managed to find on here. Recently I bought a single cooler master RGB fan after which I realized I need a controller so bought that (similar to those above, but a bit bulkier) which...

How do I connect 3 ARGB case fans and one ARGB CPU fan to a motherboard that has no ARGB connectors while still being able to control them through aura sync. Is it even possible? If so what kind of control box will I need?