clock core

Hi , Is normal for MSI afterburner changing GPU core clock always in every fresh installation of windows .... ? I had the clock already at 2669mhz , 2679mhz and now 2674mhz . I have a MSI RX 6600 XT MECH 2X 8G OC

I installed E5 2698 V3 for my server, I confirmed that I didn't have any energy saving settings turned on, and the cpu clock turbo in the BIOS is turned on. All-core turbo clock is 2.8Ghz, but single-core clock is only 2.5Ghz ? I don't know what's happened, should usually be 3.6Ghz or 3.3Ghz...

What is the thickness for thermal pads on rog strix rx 470 ? i dont have any on my card and i think thats why my oc is crashing and idk why when i put higher core voltage on my oc my core clock starts fluctuating and my temps are good low 70c

Hii, I have a acer nitro 5 an515-52 2018 laptop, specs: core i7 - 8750h , 12gb ddr4 2400mhz, gtx 1050, Windows 10 21H1 My gpu core boost clock was at 1759Mhz(most common) and undervolted my cpu using throttlestop and undervolted my gpu using msi afterburner my gpu reached 1759 Mhz while...

I have a hp pavilion notebook laptop it comes with i5 8th gen processor 8300H with 2.30 ghz base clock speed recently i was looking into my task manager of my laptop and i notice a weird clock speed going up high up to 4ghz and the cpu utilization is low like 2% (while it is connected for...

so my problems seem to have started back when my PC bluescreened (apparently because of overheating) I later checked to see that it was reaching temps of 90 just idling on desktop (with wallpaper engine running) This shouldn't be happening obviously especially since my cooling solution still...

the CPU core (on all 8 cores) clock speed is constantly fluctuating between 800MHz to 5,200MHz at Idle and also under load, I think. is this behavior normal and safe for the CPU? I'm using HWINFO64 to monitor and my CPU is an i7 10700k.

So, recently got an intel i5 7400 last week, gaming has been fine except i've had constant dips in framerates while playing games and even in windows. Thought it was coming from the Rx 580 i recently bought aswell (same day as the i5 7400) but after i saw the CPU's power consumption never go...

I apologize if the issue is glaringly obvious, but I'm new to advanced bios settings, especially since my last motherboard was a pre-built. I got a new motherboard, more specifically the GA-X58A-UD3R, so I could overclock my CPU and reach the advertised XMP RAM speed of some new RAM I had...

So i have a strange question i paired this 2 components and the question is the processor normal clock is 3.7 with a boost of 4.2 but i only get a 3.8 so is it because of the motherboard or i need to enable something in bios. And the motherboard doesnt support ryzen 3000 series without the bios .

My Ryzen 5 3600 does not boost to declared 4.2 GHz. Even on AIDA64 CPU Stress test. My system specs: MOBO: ASUS PRIME B350M-A GPU: MSI GTX 1080 GAMING X PSU: Aerocool VX-750 OS: Windows 10 64-bit Max I have 3974 Mhz. I monitored frequencies in Ryzen Master while AIDA64 System Stability Test...

Hi i would like to create a server render farm, i need core with high clock speed, and ram, i don't need gpu, i already have one old that will be enough. I don't have so much money(around 200 max max 250 Dollar/euro) and after searching stuff i have this x5675 ( 40$ one ) that i would like to...

Hey everyone, I need help on this ASAP. I've recently built a new computer and everything was working fine. Kaspersky needed a reboot of the computer to finish installing so I let it happen but when the computer loaded back up the resolution was completely off. At first I thought maybe it...