CPU voltage

I'm using Eco-Mode with DOCP Enable and Curve Optimizer Off. CPU Voltage Set = Auto I tried to Eco-Mode with Curve Optimizer for all cores -20 negative it crashed after 8 hours whea-logger event id 18 and Kernel-Power event ID 172

Hey y'all, I'm trying to build a system for gaming, rendering, game dev, and 3d modeling. My CPU is going to be either a 12900k or 12400kf (with a RTX 3090 Ti). I've been looking into ram and though I would go for DDR4 and 2x16GB, with a speed of 3600 and CL14 memory (I chose the G.Skill...

Hello, I want to change/set supply voltage or frequency of each cores freely in the CPU. Is there anyway that's possible? I can't find any papers on how i can set the voltage of each cores separately, or if it is possible, entirely.

System Configuration: Operating System: Windows 10 CPU: AMD Ryzen 5 3600(no overclock) GPU: RTX 3070 GAMING OC Motherboard: MSI B550 GAME-A-PRO RAM: Corsair Vengeance LPX 2x8GB DDR4-3000 PSU: Corsair RM750 Gold Monitor: HP X27qc, 27 Inch QHD Curved Monitor, with included DisplayPort cable...

My cpu has been running at the same percentage of what the max processor state is, this has been going on for couple of weeks and i can't seem to find the reason why this is happening. I have tried all sorts of methods, did not work. Here is the image of my task manager: One thing to note is...

When my pc is not running anything at all it starts as temperature around 40C, CPU clock speed under 700MHz and CPU voltage around 1.1. After 10 minutes of not moving the mouse CPU Clock Speed goes 4600, CPU voltage goes 1.4 and temperature goes 55C. According to task manager no new process...

My current build is a ryzen 5 1400, b450 tomahawk max, rx 570, I recently got a ryzen 3 3200g from a friend for free but had 3 bent pins, i fixed it and put it in but when in bios the voltage said it was automatically at like ~1.41v, this caused it to be about 5c higher than my ryzen 5 1400...

Hello, I want to know what voltage should be set for manual overclocking for my AMD Ryzen 7 3700X processor using AMD Ryzen Master software. I am running my processor at a frequency of 3,700 MHz manually with voltage set to 1.2V using AMD Ryzen Master. (Motherboard used: MSI B450 Gaming Plus) I...

So today I decided I was going to attempt a easy beginners overclocking session. I didn’t want to go through the process in the BIOS and wanted to keep it simply thus I used Intel‘s XTU. With my luck I was getting a current limit throttling issue. Decided to go into the BIOS and raise the CPU...

Im using a i7-6700k with an ASUS Maximus VIII mobo and im using a corsair H100i v2 as a cooler and i recently overclocked and in my bios it says my cpu voltage is at 1.232v and then on the ASUS ROG motherboard software (Dual Intelligent Processors 5) and CPU-Z it says that its at 1.488v - 1.504v...

I recently used ryzen master to check voltage under load and cpu-z and it says that 3600 is boosting up to 3.7 - 4.2 volts. its this normal as it seems quite high. I checked the cpu in bios and its set to auto. And ram is at 1.35 volts with xmp enabled. I have had some system reboots under load...

Hi, Below are my system specs - MOTHERBOARD (Chipset - Z370) = Asus TUF Z370 PRO gaming CPU(Socket - LGA 1151) = i7 8700 GPU = ZOTAC GAMING GeForce RTX 2080 Ti Twin Fan RAM = Corsair Vengeance 16GB DDR 4 SSD = Samsung 750 evo 120GB HDD = Seagate Barracuda(Green) ST1000DM010-2EP102 1TB PSU =...

Hello people, I'm trying to use Adaptive Mode for CPU voltage in the UEFI on my Asus ROG Rampage VI Extreme, and despite having set the 'Additional Turbo Mode CPU Core Voltage' to 1.20V, when I load into Windows CPU-Z states that the maximum my CPU is using is 1.25V. I've looked into this and...

Hello Everyone, My PC setup: i7 9700k Cooler Master Masterliquid 240 MSI Z390-A PRO MSI GTX 1660 Ti G.Skill 2 x 8GB 3200MHz PSU: Corsair TX650(from my old PC) Cabinet: Antec Full tower with 3 cabinet fans 120mm 1tb WD HDD(from my old PC) OS: Win 10 It's only been a month since I assembled it...

Heyo! I don't know if this is common, but my cpu voltage is normally at 1.4 But every like 5 seconds it changes to \ 1.39 or 1.41 causing my cpu to heat up like 7 degrees for a seconden and cooling down again. This is a constant loop. Anybody who can maybe help me? My CPU: AMD ryzen 2600x...

I applied the conductonaut to both to my ryzen 1600 and evga clc 280 cooler. however, the tctl/tdie temperature still at 70c nothing changed. what is the problem here?

I'm looking to replace my current PSU(which is having voltage fluctutation issues after 7 years of use) and have settled on 2 possible options.The Corsair RMi750w or the Corsair RMi850w. These are the only 2 high end options available where I live(even online).No EVGA PSU available(except for...

I have had this problem for a while now. Quite frankly, at this point, I'm rather creeped out by it. I have done just about everything to fix this. I disabled it in the settings and uninstalled it but, it`s still on, giving me notifications every time it resets itself. Acer won't even help over...

When I press the power button nothing happens. No beeps no nothing. I assembled my rig 5 years ago, power connections were a bit janky but it worked. Went to update my gpu to something new, and power button did nothing. I took the new gpu out to try booting without it. Still nothing...

I've been out of the loop for a long time but its time to upgrade my old 650. There are just so many to choose from I have no idea where to get started.

Ok, so, I recently just purchased the Gtx 1070 sc and I want to upgrade my CPU as well. Current Specs: CPU: i5 3350p MB: Asrock Z77 Extreme4 Power Supply: Corsair Cx750m GPU: EVGA Gtx 1070 sc Still new to building and upgrading my computer so any advice will be appreciated to the fullest...

I have a OEM windows 10 that I purchased and it tells me that it is not activated, can I simply return this one and buy a retail copy, and then change the key in the settings to the retail key?

Does RCA to HDMI upscale need extra power supply

For the past 6-9 months, Windows (7), has been turning off my sound in what appears to be a random cycle. This usually happens when I turn off my speakers at night (when I remember to do so). I have to go into the Sound controller, select the audio device, properties, levels and click to...

Hello, I am planning to buy a new PC which should support all games for at least next 2 years without needing to upgrade much (Except Graphics Card - May be). The budget includes both CPU and Monitor too. My Budget is around 60000 INR. I may be able to stretch another 10000 INR and not more...

Hey there. I have a question. I have a school project to create a beast gaming pc, and with your help, I might get a good grade. What i want: A list of the best components you can get for a flawless gaming experience. What i need of components: Motherboard, Processor, Memory, Graphic card...

i got a desktop but it cannot connet to wifi. how to make wifi available with a router?

Hey everybody, just found out my motherboard died, and i need a new one. Just wondering motherboard i should get because im completely clueless as to what to buy, here is the specs to my pc...