fan control

First off, sorry for the long post, but any help would be hugely appreciated. This weekend I finished (or thought I did..) a build using the Antec Flux, which has a fan controller on the back of the case - diagram included below. Motherboard has 4 Chassis Fan Connections and 2 CPU Fan...

I have a couple of questions about the ASUS Hyper M.2 Gen5 PCIE-to-M2 storage adapter card that I wasn't able to figure out from the spec sheet and documentation. This card has a 6-pin auxiliary power input socket (same as some graphics cards) and I can't figure out when you actually need to...

Hello TomsHardware people! I just finished building my very first gaming PC yesterday and what joy it was powering it on for the first time and setting it up. Such a fulfilling experience. I built my pc in the NZXT H9 flow tower which comes with 4 fans and then i bought 6 extra Arctic F12...

Was playing a game and left my PC on while I napped for an hour. Woke up to my fans spinning really loudly. Restarting PC didnt do anything. MSI Center's fan control didn't do anything. Changing POWER Options to Power Saver etc. didnt do anything, neither did changing the fans speed through BIOS...

Dear Community :D I've installed "Fan Control V112" a few days ago and realized, that one fan has a very low and the other an extremely high rpm. Is that normal, or do I have to look after that? Many many thanks! In bios, one fan is always at 0 rpm, maybe its the CPU?

Hi All, I just got my first gaming laptop, and having only ever built performance orientated desktops, I am used to having a lot of control over my voltages on clocks, voltages and fan speeds on my systems. However, with my new Acer Nitro 5 I don't (yet) know how to set a custom fan curve or...

Alright so this is "my LED fans wont work" number 874 but here is the synopsis. I bought some cheap GIM fans for my first tower. When I power it on all fans are working but the leds on the fans work for a split second before shutting off. Upon further investigation when I tap the power it turns...

I have a sky 900 firmware modded to 7900 series, and I have attached a blower to the back. In old catalyst drivers everything works fine, but with newer drivers, the only fan header on the card is set to be for gpu2. This means that when crossfire is not being used, since gpu2 does not heat...

Hi, as the questions says I was wondering what happens if I increase the fan threshold in the app. I am hoping this will increase the minimum speed my fans will run at so they do not go below this RPM. Many thanks, Tom

Is it possible to control a "case fan" speed from a MB header by how much watts are currently loaded into the PSU? Asus FanXpert 4 only offers speed curves using various different temp readings in system. All google searches get crowded out by questions asking about fan watt draw (the fan...

I have a fairly old mobo and I recently bought a new chassis fan. I've been without it for a few years and never cared much since I don't push my hardware too much. At first the fan was running at 2500 rpm but I noticed that the original fan was plugged in the slot for the power fan, so I...

So I have an MSI Ventus 3x RTX 3070 and I was hoping to change the fan speed with Afterburner. In the software, I made sure that "Enable user-defined software fan control" was checked and went to change the fan speed to 60% but every time I click apply, the slider goes from 60 ALL the way down...

hi guys i just restored my os on my pc and now my cpu fan keeps running at 4000+ rpm at all times it makes a weird sound which I assume is because it's spinning at such a fast rpm speed i tried to set the CPU fan speed from the smartfan 5 program in the gigabyte bios to silent but it keeps...

Hi, so why do I have additional 4 pin PWM connector on low-entry level PSU when on official page they say nothing about it? Model is Antec V550. PWM is on same cable with molex connector so I been wondering if that means when I connect PSU to the motherboard, all my case fans connected to the...

Good morning,I'm thinking of buy this HUB Fan controller from DeepCool( DP-FH04PWM-HUB ) to use something like 8 cooler fan. The MOBO that I want to buy is a B450M gaming from gigabyte and the fans that I'll buy are the Cooler Master MF 120L. The mobo just have support for two chassis fan, and...

I recently bought a h500 not "i" version case. And only realized after how good the CAM software is. Is there any other hub, and not as expensive, as the NZXT one from the h510i case? The main reason is that i wanna be able to set better my fans speed, since they're a bit noisy right now. I'd...

Unable to control my B450M-HDV R4.0 fan speeds even after adjusting in bios and speedfan they just blast full on. Ryzen 3 2200g 16gb ddr4 3200 on the xmp2 profile. bios v 3.7 I have 2 x 140mm Rosewill fans on intake connected a pwm fan splitter into the 4pin chassis fan connector and 1 x 140mm...

Hi guys! I'm about to upgrade some parts on my PC, especially the cooling/noise reduction. I'm gonna buy a Fractal Define S, which has 2x 140mm 3-pin fans, I also have 2x 140mm 3-pin fans AND 4x 140mm 4-pin PWM fans laying around. So there are 4x 3-pin and 4x 4-pin fans. Since no MoBo has so...

Hi all, So I'm pretty thrilled at the moment, because I just learned that I can't seem to be able to set my CHA_FAN(1-3) headers to fix rpm mode from BIOS's qFan Control as around 72-75c it's 100% all the time... which is am irritating. I know there was a fix rpm setting on the AI Suite but why...

Hi, I'm building a stable computer for photo shop and some video editng and want to know if this motherboard will work well with a i7 8700? Motherboard; z370-A Pro MSI I like it because it has 6 fan headers for PWM and is ready for i9 processors when that time comes. Regarding RAM: Should i...

Hi. i been using speedfan quite a while. Its all good as i connect my front fan speed based on my gpu temperature. but im having a problem with my cpu temperature sensor on speedfan. i already adjust fan curve on bios but it seem speedfan already bypass all the fan controller. do you guys know...

Recently built a pc, and it’s running great, but I want to over lock it. I have a total of 8 fans in my case. I have the commander pro powering all the fans, should I plug some of those fans into the mobo or leave them plugged into the Corsair commander pro? I’m wondering if I should plug some...

I'm looking to buy an Asus or Gigabyte motherboard, and would like to know how well their BIOS hardware-monitoring is supported in Linux, especially fan/pump control. Does Linux even use the BIOS after boot? In case I have to use lm_sensors, can you tell me if your Asus or Gigabyte model is...