Motherboard could be finde it wirken whyle the brocken psu was cpnnected maybe now Werk power Regulator or something ill test this witch a working psu it comes tuesday maybe nothing Else is fried and im lucky it might just be the gpu sinse this one was a gt210 pny and probably not as well build...
After 2 decades of reading the questions of others in the hopes of getting my answer this is my very first thread/post.
I had a Toshiba L755D-128 Laptop from around 2012. I dug it out and I found it to be like Win98 type slow and the only media I tested was youtube which was constantly glitchy...
Case: Fractal Torrent Compact
GPU: RTX 4080 SUPER Gainward Panther OC
CPU: Ryzen 7600
Image of PC:
View: https://imgur.com/a/7HzBzzE
As you can see my GPU is being choked as it is nearly touching the front fan and only receiving partial air from the front fan. Would it be beneficial to add...
As the title suggests, I have recently upgraded to an RX 6600 GPU from a GTX 1050Ti 4GB. The moment I did however, I have recently gotten situations where, in the Task Manager whenever my GPU reaches 100%, it will decide to suddenly make my PC slow into a crawl. Any solutions on how to at least...
Is it possible to pigtail connection for the Sapphire Nitro+ 7900 XTX Vapor-X 24 GB as my PSU only came with 2 PCI-E cables it will only be for some weeks as i've ordered a extra cable that works for my PSU (Thermaltake GF3 1000W)
illustration for what i mean
I just noticed an issue with my GPU not running at the correct speed. It is running at 4 x8 instead of x16. I first became aware of the issue when I turned my PC on and I got a message to say my gpu was running at PCIE gen 3 speeds. I am not sure why the change happened but I was alerted to it...
I have an 3040 MT w/ i5 6500 + rx 460 and i want to upgrade to rx 470 but my power supply is 240w max output (PSU model H240AM-02) but i have no idea if that psu can handle it without blowing up, so what do u thinks guys
Specs:
Mobo: Asus TUF Gaming Z790-Plus
CPU: Intel 14700K
GPU: GeForce RTX™ 4070 Ti SUPER 16G VENTUS 3X OC
RAM: 2x 16 GB Corsair ddr5 6400mhz
PSU: BeQuiet 1000W Platinum
OS: Windows 11 Pro
I built this PC about a week ago and everything seemed to be running fine until it wasn't. I've been...
PC black screen after boot video showing debug leds
I have a custom pc with
RTX 3060 (bought yesterday)
MSI MPG B550 (bought early january)
16GB DDR4 OLOY RAM (2 years old came with prebuilt)
thermal take 600w(also 2 yrs old)
9 fans all connected to one hub
AMD RYZEN7 3600X (bought used mid...
My setup is an HD60 X plugged into my gaming PC's GPU (4070). I know this capture card is now GSYNC compatible, so I followed the guide on Elgato's website (link bellow). It hasn't been a flawless experience unfortunately. I sometimes have to reboot, plug and unplug for things to randomly work...
So basically everytime i turn off integrated graphics so that i could use my rtx 4050 only, it would set me back to 60hz without letting me putting it to 144hz it just sets my display to microsoft display adapter which is really annoying i want to use my rtx 4050 only not no igpu.
I have an older gaming pc, but based on everything I know I should be able to run 2 with IGPU and my main monitor from GPU, but still only 2 monitors connect at once.
I have tried all possible cables with each monitor and different bios settings and resolutions. IGPU multi-monitor is enabled...
Hi Everyone!
My aim is to reduce the power consumption and heat production of my PC. I want to install 2 graphics cards.
I have an old card and I'd like to buy a newer, better one which consumes more power and produces more heat. For non-CAD work, I'd use the old card and power off the new...
Hi,
I have:
-Biostar B450MH Motherboard,
-AMD Ryzen 7 2700X CPU,
-ASUS Radeon RX580 (8GB)
-KINGSTON HyperX 16GB RAM 2x8GB 3200MHz
-1 BIOSTAR SSD 480GB and a Western Digital Hard disk 1TB
I want to buy this GPU upgrade for my PC...
Hello,
I built a PC two months ago. I replaced the GPU and PSU few days ago and now I get random black screen for few seconds, everything is working as normal, no restart just the screen goes black briefly, then everything is back to working normally. Every cable is installed perfectly, i...
I bought a 4080 from a guy on ebay. It didnt occur to me to ask him to send me his receipt for poss future rma until I sold my 4070 and offered it to the guy i sold it to. It was new and still wrapped but that doesnt mean anything i guess. Anyway I had a 180 deg conn melt on it and now going...
My compter started having this issue a few days ago. When I turn it on after shutting down, there's no display. The computer will stay on for about a minute, then the VGA alert light on the motherboard flashes on for a second before the computer forces a restart. The first two times it happened...
I have a
-BIOSTAR B450MH Motherboard
-ASUS Radeon RX580 8GB graphics card
-Ryzen 7 2700x CPU.
- 16GB RAM 3200mhz
I was wondering what's the best Graphics card (8GB) I can get to replace the one I have now? I primarily use it for playing very demanding video games with Ultra graphics and VR too?
Lately I've been noticing lower fps in games than before. Tried updating drivers and clean-installing drivers from manufacturer. Checked my system for viruses and miners, cleaned the laptop from dust. Installed all latest BIOS and Windows updates. Tinkered with GPU settings. So far nothing...
Hi Im not really tech savy when it comes to pc parts and was wondering which GPU is better. My Current GPU in my new pc which is "Radeon RX 6700 10gb" or my other GPU "GTX 3060 12GB"
I would assume the GTX is better but the radeon came out more recently than the 3060,
So as the title says, my MSi B450M VDH MAX has four LEDs that show the POST and now I've noticed that the LED for VGA lasts a few seconds longer than it normally does. Otherwise it boots to OS just fine. There a way to fix this, or at least is this an issue or not?
What happened before?
Before...
i enabled the iGPU on my Ryzen 5 5600G to use two monitors using different graphics, RX 470 4gb on my main monitor and the iGPU on another, but i can't switch which app uses which video card inside Windows "graphics settings". I want to do this to offload say youtube to my iGPU while I use after...
Hey guys,
First post on this forum as I’m desperate here! Basically need help diagnosing a problem with my PC booting up, but not displaying anything, as well as my keyboard and mouse not powering on. I’ve tried diagnosing the issue by upgrading the motherboard, CPU, RAM, as well as a new PSU...
Hello everyone, I'll put all my hardware down below then explain my problem. sorry if my english isn't the best.
Motherboard: Gigabyte A320M S2H rev. 1.1
CPU: Ryzen 5 5600G
GPU: XFX RX 5600 XT THICC II PRO [used]
RAM: 2 x 8GB 3200mhz Hyperx
PSU: NZXT C750 750w
1 x SSD 128GB
1 x M.2 SSD 500GB
1...
Hopefully you guys have some answers, could just be because It DOESNT need to be at 100%. But anyways picked up a i9 14900k with a 7900xtx. Plays games great at 1440 and 4k. Usually play at 1440. However I noticed that it will only use 70-80% usage in games. Like to sit at 75% to be precise. It...
Guys, I was playing normally yesterday, and today when I turn on the computer it doesn't work.It turns on, the bios turns on, but then the computer no longer shows an image. It's a Ryzen 7 5800x, RX6800 XT, 32GB RAM, Corsair 750W. I notice that as soon as I turn on the GPU, the fans are...
Hi everyone, first post here.
So I decided to upgrade 90% of my pc (everything but the case) and have taken it all apart to finally assemble the new parts.
Spec :
ryzen 7 5800x
rx 6700XT
32gb ram netac ddr4 3200
corsair 80 plus bronze 750w
msi b550 tomahawk atx (apparently 5000 series ready…)...
hello on my RTX 2080 Super happens this
i have checked
1-all cables just fine
2-gpu undervolt or gpu at normal voltage(still does it)
3-removed ram tunes and cpu oc(3900x)
4-clear install of gpu drivers
5-gpu temps are normal
6-updated bios and chipset drivers
the weird thing is that when...
Hi All ,
I will try to summarize as much as possible , i buyed a rtx Gigabyte 4070 on September for my old build , the only detail i think matters to mention is that the cpu was a 8700k , after installing the 4070 i started to notice some stuttering time to time , it wasnt always and sometimes...
This is my first build. The story is. After done building I turned it on and when loading with the mobo's logo, it crashed, the power cuts off. Tried it again after making sure every pin is connected fully, it cuts off again. I did this many times after trying reseating GPU, CPU, RAM. Eventually...
Hello there!
Recently i've ran into a problem that is weird. Sometimes my PC screen goes black (No Signal) while some features of the PC are still running in the background (I can hear the sound of the game or the voices of my friends on Discord , though they can't hear me back). When I restart...
System Info
Ryzen 7 7700x
AMD Radeon RX 7800 XT
Corsair Dominator Platinum 32GB (2x16) 5600mhz
Samsung 980 NVME M.2 2TB & 1TB
MSI MAG Tomahawk B650
MSI MPG A850GF Power Supply 850w (Gold Rated)
Issue
So this weekend I've assembled this new PC of mine and thought I'd switch from Nvidia to AMD...
Hi, long time since my last post here! I have had the GTX 1070 for 7 years now and it's served me well, but it's time for a change - i recently upgraded my motherboard, cpu, psu, ram - basically everything except from the gpu. Oh, also i spilled hot chocolate in my pc which seemed to target my...
Hi. My problem is that my GPU Clock Frequency is at maximum (1366mhz) in some games, and at minimum (300mhz) in others. I need my GPU to use the frequencies I need when I really need them, not to use the maximum unnecessarily
I've never had this problem before. I always take care of the...
Hello,
I wanted to ask your guys opinion on if this is too good to be true. I was browsing the used market for an upgrade and just noticed a brand new listing for an RTX 3070, which claims to be "broken". As described, the card boots into windows, is able to withstand FurMark without any...