[SOLVED] 1.45V ok for 10600K?

[jackcalico]

I have the following build in mind: https://pcpartpicker.com/user/jackcalico/saved/Zx3mrH

PcPartPicker however is showing the following note:

"The Patriot Viper Steel 16 GB (2 x 8 GB) DDR4-4400 CL19 Memory operating voltage of 1.45 V exceeds the Intel Comet Lake CPU recommended maximum of 1.35 V+5% (1.417 V). This memory module may run at a reduced clock rate to meet the 1.35 V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum."

So, couple of questions here. First, what do you guys think about the build? And second, what about the note, will the system work or some parts need to be replaced?

Thanks!

 

[dimtodim]

i cant see link is private

 

[jackcalico]

i cant see link is private

Strange, here is a screenshot

 

[dimtodim]

Strange, here is a screenshot

use another memory

 

[jackcalico]

I saw that by using memory with lower voltage (1.4 max) the alert disappears. The question is, will the 1.45 be compatible with 10600K despite pcpartpicker's alert?

 

[CompuTronix]

jackcalico,

It will work, however, at 1.45 volts you run the risk of causing "electromigration" and "degradation" to the IMC (Integrated Memory Controller) which may eventually create memory instability that can corrupt your software. As dimtodim suggested, select a different memory kit that will run at 1.40 volts.

CT

 

[jackcalico]

Thank you both for pointing this out. I saw that, according to Patriot's site, the Viper Steel 4400MHz has a secondary XMP profile of 4266MHz at 1.35V, so I would assume that it will work at least with that second profile. Correct?

 

[CompuTronix]

Yes, that's correct.