Hello,
I recently managed to get my hands on an RTX 3080. It's a gaming oc waterforce LHR for all it's worth.
The Galax HOF GTX 1080 ti I had, was working fine up to that point.
I wanted to keep the 1080 ti to mine with it and help offset the half-kidney I paid for the 3080...
So, I removed the 1080 ti from the top slot and put it in the second one, installing the 3080 into the first slot.
After powering the pc, using the latest DDU to clean the previous drivers and installing the latest driver, I noticed that the whole system became slow as a sloth. Everything on the screen stuttering extremely. The cursor, right-click menus, explorer windows and simple programs like gpu-z were taking near a minute to open. When the latter did, it showed both cards as not having cuda, openCL or physX enabled.
Removing the 1080 ti, the 3080 worked as it should.
Installing the 1080 ti by itself; same problems again. Tried DDUing the drivers, reinstalling the latest ones and I have the same issues.
Noteworthy is the fact that when I attempted to flash the 1080 ti I was getting the message "Detecting GPU failed.". By removing the drivers and it seemed to get the flash. But again the same issues...
Did I brick my card somehow? I always touch the chassis to ground myself before touching anything with a pcb.
Needless to say the 1080 ti is out of warranty...
Any ideas?
Thank you for your answers
I recently managed to get my hands on an RTX 3080. It's a gaming oc waterforce LHR for all it's worth.
The Galax HOF GTX 1080 ti I had, was working fine up to that point.
I wanted to keep the 1080 ti to mine with it and help offset the half-kidney I paid for the 3080...
So, I removed the 1080 ti from the top slot and put it in the second one, installing the 3080 into the first slot.
After powering the pc, using the latest DDU to clean the previous drivers and installing the latest driver, I noticed that the whole system became slow as a sloth. Everything on the screen stuttering extremely. The cursor, right-click menus, explorer windows and simple programs like gpu-z were taking near a minute to open. When the latter did, it showed both cards as not having cuda, openCL or physX enabled.
Removing the 1080 ti, the 3080 worked as it should.
Installing the 1080 ti by itself; same problems again. Tried DDUing the drivers, reinstalling the latest ones and I have the same issues.
Noteworthy is the fact that when I attempted to flash the 1080 ti I was getting the message "Detecting GPU failed.". By removing the drivers and it seemed to get the flash. But again the same issues...
Did I brick my card somehow? I always touch the chassis to ground myself before touching anything with a pcb.
Needless to say the 1080 ti is out of warranty...
Any ideas?
Thank you for your answers
Last edited: