[SOLVED] 144hz not working well

[taae]

I buy today the :benq zowie xl2411p and all god but When I make the change to 144hz the letters and the monitor on the top are a little blurry and on the bottom there is a warning type "incorrect cable please use the dvi dual-link cable"

And I know what a DVDI-D is and I'm using a yes.

My grapich card : GTX 1050 support that i already see

Someone have that problem can help me?

i spend already 4 hours and i dont solve anything

 

[FailG]

Are you sure you're using a DVI-D dual link cable and not a single link one?
EDIT: also try using the display port cable.

 

[Glenwing]

And I know what a DVDI-D is and I'm using a yes.

DVI-D is not the same as DVI Dual-Link.

 

[taae]

DVI-D is not the same as DVI Dual-Link.

how i know the difference?

 

[taae]

Are you sure you're using a DVI-D dual link cable and not a single link one?
EDIT: also try using the display port cable.

display port dont work in graphic , the cable dont enter correctly i will try tomorrow hdmi 2.0

 

[Glenwing]

how i know the difference?

You can't tell by looking at it

 

[Mashuplol]

taae the ONLY way to get 144hz on this monitor is Dp or DVI dual link no matter what HDMI cable since the port on the monitor wont support it.

 

[DSzymborski]

 

[taae]

taae the ONLY way to get 144hz on this monitor is Dp or DVI dual link no matter what HDMI cable since the port on the monitor wont support it.

i undertand that yessterday , the problem is idk why monitor dont working 144hz with thiss dvi cable i have

 

[taae]

You can't tell by looking at it

One moderator already post here the post and mine its the correct DVI-D dual link...

 

[taae]

I have the 3 cable in that photo , 60hz 1080 its fine if i put 144hz everything is blurred and keeps giving that warning....
if i change for hdmin only can get 120hz and is with 1440x900 resolution

 

[FailG]

display port dont work in graphic , the cable dont enter correctly i will try tomorrow hdmi 2.0

The display port is the one far left and it can only be inserted on one way

 

[taae]

The display port is the one far left and it can only be inserted on one way

dissplay port in grapich is 1.4 and monitor 1.2 when I put it in the graph, it goes in but it is wide i think thats the problem

 

[FailG]

dissplay port in grapich is 1.4 and monitor 1.2 when I put it in the graph, it goes in but it is wide i think thats the problem

I don't think they're different in size, only in data bandwidth.

 

[taae]

I don't think they're different in size, only in data bandwidth.

happen me the same in hdmi when i put the hdmi 1.4 enter normally if i put the normal hdmi still wide like cable dp

 

[Glenwing]

One moderator already post here the post and mine its the correct DVI-D dual link...

It is incorrect, as explained in section 4.2 here: https://forums.tomshardware.com/threads/how-to-connect-to-a-120-hz-display.3268285/#post-20043088

A cable that looks like yours could be either dual-link or single-link.

 

[taae]

It is incorrect, as explained in section 4.2 here: https://forums.tomshardware.com/threads/how-to-connect-to-a-120-hz-display.3268285/#post-20043088

A cable that looks like yours could be either dual-link or single-link.

i think mine can be a fake DVI-D dual link tomorrow i will be one new

 

[taae]

UPDATE : ALREADY buy a DVI dual link then when i put hym i already see 144hz but when i put keeps blurry the photo