I'm trying to figure this out: I have Qwest DSL and a single-port Qwest-supplied DSL Actiontec modem; behind that, I have a Belkin wireless router/hub, which 2 PCs plug into. The internet connection works great on both PCs. However, I'd like to set up a web server on the PC at 192.168.1.101:80, so where and how do I set up port forwarding? I see the port forwarding, but I don't know how to make the jumps or if something special needs to be there. I also don't understand what dynamic routing is, but nothing works unless it is on. Any help would be appreciated.
Actiontec DSL modem/router:
LAN IP: 192.168.0.1
Subnet mask: 255.255.255.0
Dynamic routing type A
Port forwarding: ????
Belkin wireless router/hub:
Firewall off
Subnet mask 255.255.255.0
Wan IP 192.168.0.3
Default gateway 192.168.0.1
DNS Address 192.168.0.1
LAN IP address 192.168.1.1
Subnet mask 255.255.255.0
Port forwarding: ????
PC 1: 192.168.1.101 (static)
PC 2: 192.168.1.102 (static)
Actiontec DSL modem/router:
LAN IP: 192.168.0.1
Subnet mask: 255.255.255.0
Dynamic routing type A
Port forwarding: ????
Belkin wireless router/hub:
Firewall off
Subnet mask 255.255.255.0
Wan IP 192.168.0.3
Default gateway 192.168.0.1
DNS Address 192.168.0.1
LAN IP address 192.168.1.1
Subnet mask 255.255.255.0
Port forwarding: ????
PC 1: 192.168.1.101 (static)
PC 2: 192.168.1.102 (static)