2500+ running at 1.5Ghz, not 1.83Ghz

Dax

Distinguished
Jul 10, 2003
121
0
18,680
Not sure if this is common, but my AMD 2500+ Barton CPU clocks in at ~1.5Ghz while the specs say that it's core speed should be 1.83Ghz. It's on Asus A7V8X-X motherboard, and it's temperature is around 95F. Any possible causes of this?
 
If it says it's running at ~1466MHz, you need to change the bus speed from 133 to 166MHz.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
 
Check your FSB is at 166mhz(333) and not 133mhz(266) and also your multiplier should be 11

<b>Vorsprung durch Dontwerk</b>.....<i>as they say at VIA</i>
 
Thanks, that helped. But now the temperature ranges between 115-125F, without any extra case fans. With one 80mm fan, I can drop the temp. range into 105-110F. I tried looking for recommended temp. ranges for 2500+ but couldn't find it at amd.com, does anyone know (roughly) the max recommended temperature? And is anyone aware of any places online which sell close to inaudible 80mm fans?
 
You should try to keep your cpu temp below 122f/50c, but if it's in a warm room that could be tough in the summer. The real test is if it crashes. The AMD chips can survive temps close to 185f before they melt.
 
Yes, your cpu is not hot,.. for more information you can see cpubenchmark in tom's hardware.com..... all of information about cpu are in this article,, check out <a href="http://www6.tomshardware.com/cpu/20030217/images/cpu_chart.gif/">NiX Website</a> for the detail.

<a href="http://www.nixindonesia.tk/">My Website</a>
<a href="http://www.allaboutna.tk/">NiX Website</a>
<a href="mailto:nanix@hotmail.com">My E-Mail</a>