3200+ overclock?

HotBox

Distinguished
Apr 1, 2004
1
0
18,510
I want to overclock my 3200+, but I'm running into a few problems. I have a GA-7N400 Pro2 motherboard with the manual system jumper switches on it; however, when I try to manually set the jumpers nothing really happens. . . i.e., no frequency boost. Is there some way of changing this? Am I doing something incorrectly with the jumpers? I have tried boosting only the front-side bus to 210, but for some reason it was not stable (temperature never rises above 30 C). I haven't tried manaully configuring my ram, nor really playing with the Vcore settings (I did, however, look at the Vcore settings. . . they were a bit different than what is usually discussed. . mine are in percentages rather than in voltages). I would really like to get my system beyond 2.5 GHz. Any help is appreciated.

3200+
gigabyte 7n400 Pro2
Radeon 9700 Pro
corair hydrocool200
520 Watt power source (forget the brand)
1 Gig 400 MHz ram (forget the brand)
 
More voltage, you'll need at least 1.75-1.8Vcore and your ram's rated for 200mhz, not for 210mhz, so you'll need to loosen the timings and boost Vdimm up to about 2.8V

-AMD Athlon64 3200+@2300mhz -GAK8N -3x512 Hynix PC3200 ram@192mhz 2.5-3-3-7 -Albatron 5900PV @ 509/1000 -SB Audigy -Adaptec 1210SA Raid -2x120G Seagate SATA150 7200.7 Raid0 -Enermax 460watt psu