.

[Sven0428]

Recently I upgraded my router mentioned above, but after installing the firmware upgrade, I resented the router settings to factory default, after the status went to 100%and it said finishing, it loaded finishing for a couple minutes, then I closed the tab, the router stopped working, I tried resetting it, 30/30/30 reset, none of them worked, how to fix it?

 

[kanewolf]

What firmware did you try to install? Factory upgrade? Tomato? Merlin?
You need to see if you can get recovery mode to work.

 

[kanewolf]

You are going to have to try to get to a recovery mode. Usually that means holding the reset button, plugging in the unit with the reset held and then waiting until you get a flashing LED. You might then be able to load firmware. But loading asus firmware on a non-asus router (even though it is "supposed" to be the same) was obviously a bad move. You may have bricked it. Start googling for recover mode and bricked with your router model.

 

[DSzymborski]

Why, after receiving help for a problem, would you then delete your question so that other people cannot resolve a similar issue?