Hey guys,
I recently built a rig based on a 3900x and I am having a hell of a time getting my memory stable at anything other than the default of 2133mhz.
Parts:
I had it running for a couple of weeks on XMP (DOCP) profile and it randomly froze and will not boot again now unless I reset to defaults.
So I've been trying to do as much research as possible, and have tried most of the alternate values that the DRAM calculator gives (especially for procODT). I have also tried a SAFE profile for running it at 3200 / 3000 and it fails to post in all scenarios. Originally when installing my CPU / RAM it would fail to post until I loosened the CPU cooler a bit. Do I have shitty memory? Shitty CPU? Motherboard? I am willing to purchase a new set at this point if it is what I must do, but maybe I am missing something... I've updated BIOS, etc.
I am pretty confident that it is Hynix CJR memory based on the taiphoon output - is this correct?
I know this can be hard to troubleshoot online, but maybe there is something obvious that I am missing or can try.
Any help or tips greatly appreciated, thanks
I recently built a rig based on a 3900x and I am having a hell of a time getting my memory stable at anything other than the default of 2133mhz.
Parts:
- AMD 3900X
- Asus Strix X570-E
- G.SKILL TridentZ Neo 3600Mhz C18 (F4-3600C18D-32GTZN)
I had it running for a couple of weeks on XMP (DOCP) profile and it randomly froze and will not boot again now unless I reset to defaults.
So I've been trying to do as much research as possible, and have tried most of the alternate values that the DRAM calculator gives (especially for procODT). I have also tried a SAFE profile for running it at 3200 / 3000 and it fails to post in all scenarios. Originally when installing my CPU / RAM it would fail to post until I loosened the CPU cooler a bit. Do I have shitty memory? Shitty CPU? Motherboard? I am willing to purchase a new set at this point if it is what I must do, but maybe I am missing something... I've updated BIOS, etc.
I am pretty confident that it is Hynix CJR memory based on the taiphoon output - is this correct?
I know this can be hard to troubleshoot online, but maybe there is something obvious that I am missing or can try.
Any help or tips greatly appreciated, thanks