Tri-SLi anyone?
I stand corrected.That would be available for PRE-ORDER, not Backorder.
not interested in SLI, since some of us don't have the bank account of a small country http://www.dailytech.com/article.aspx?newsid=4812 will give the benchmarks of the 8800 GTX single configuration in Halflife2: lost coast, Prey and Quake 4 ... all are in 1600x1200 with 4xAA/16xAF.
The usual versions GeForce 8800 gtx and GeForce 8800 gts from Leadtek will be announced on 8 November, modifications with the alternative cover will be availble on 13 November. Nothing to communicates about the differences in the characteristics and price.
all video card from the first party will be prepared by producer contract , moreover this not Asus and not Foxconn. According to the specified data, video card with standard design will be relesead by MSI. Company Asus only came forward by the author of this design.
Video card of the second part will had more freedom in their characteristics, NVIDIA even can entrusted their production to several partners. However, to step back from the standard design it will not allow.It is a bit complex to predict for the moment how mych will take the phase from the first to the second part production.
The first data about the heat level of the g80 chip were worried .many have imagination that those card will heat alot and water cooling system will be immediately required to get the card working cool.
Closer acquaintance with video cards GeForce 8800 GTX showed that the power generated is not so terrible, and the cooling of video card can be successfully managed by an air cooling system and furthermore it is far from beeing the noisiest.
today appeared the photographs of the water-block prototype silenx, which was intended for the installation on video card of the model geForce 8800 GTX.
Focus attention, that because of the differences in the design of boards this water-block cannot be installed in to GeForce 8800 GTS, without speaking about other models video card. the studied water-block has contact areas with the majority of the elements: video chip, the discrete chip of input-output,memory microcircuit and the elements of memory subsystem .
From the back side of the printed-circuit board, under video chip is located the pressure plate, which fulfills decorative functions and play the role of supplemental radiator.
In the place of contact with video chip the water-block has copper insertion with the longitudinal channels. The form of channels in the remaining part of water-block is not so promoting - they do not provide the turbulence of flows, which would raise the efficiency of the heat removal. In a word, came out the beautiful and thoroughly prepared water-block, which has debatable constructive solutions. According to the preliminary data, air cooling makes possible to overclock GeForce 8800 GTX to the core frequency of more than 700 MHz, effective water cooling will for sure raise this value.
i know it is early days but i want to see minimum FPS and comparitive screen shots
Some GeForce 8800 GTX boards that were built through our contract manufacturer had a simple BOM error - wrong resistor value. GeForce 8800 GTS boards are not effected by this.
These GeForce 8800 GTX boards were shipped to our Add-In-Card partners.
We have been working with them to pull these back and change the resistor to the correct value.
We believe we will still be able to hit our hard launch this week (Nov 8th) with the new GeForce 8800 GTX boards.
This is a testament to our execution as well as the execution of our Add-In-Card partners.
Adam Foat, Product PR Manger, Northern Europe."
SLi pictures
He seems to use the two SLi bridge for his SLI test, maybe it's two-way sli to improve bandwith/performance/latencies?anyone?
![]()
Only 1 bridge here, but I dont think he ran benchies like that....
![]()
Sli score ~17200
![]()
14k 3Dmark 06
![]()
Peak power comsumption of whole system: ~140W for the card
![]()