[SOLVED] A1 A2 slots not working on a motherboard

[hotcore]

So today i noticed that blue slots on my GIGABYTE P55M-UD2 dont work under any circumstances
actually it does post when i put rams next to eachother (running in single channel) but then only one ram is detected so therefore one ram is a dummy
What are the odds something related to the chipset is messed up? I updated the bios but that didn't do anything
The configuration consists of an I5 750, 2x2gb of Elpida 1333mhz ram and a previously mentioned motherboard. The bios is updated to the latest version

 

[geofelt]

If you have reinserted your processor into the socket, you likely damaged some pins.
If so, they can be straightened out if you are very careful.

 

[hotcore]

If you have reinserted your processor into the socket, you likely damaged some pins.
If so, they can be straightened out if you are very careful.

i thought that the socket was damaged, checked twice but nope, every pin is as it should be. I also checked for damaged traces leading to the slots and everything was ok there as well
The funny thing is, while searching for solutions , i saw that quite a few people had problems with this motherboard and ram compatibility... the only thing i can try is memtest or different ram in the "dead" slots, if not it's most likely the motherboard