After SSD cloning, my PC boots fine the first time, but the second time won't

Mar 26, 2020
4
0
10
0
I had an SSD and a HDD in my PC, the SSD had the OS and programs files, I wanted to upgrade my 120GB SSD to a 480GB SSD. I made the cloning process through Acronis, then, I disconnected the old SSD and plugged in the new one, the pc boots fine the first time with all my programs and files, but then, I turn it off and the next times it just won't boots, it appears a black screen that says I need to select a booting device.
 
Mar 26, 2020
4
0
10
0
Can you boot from old SSD with all drives connected (SSD1,SSD2,HDD) and show screenshot from Disk Management?
(upload to imgur.com and post link)
It finally booted correctly, the problem was that when I cloned the first time, the new SSD was plugged in through a USB in an external case (because I didn't have another SATA cable), and when I plugged finally through the SATA cable from the old SSD, there was the failure, so I made the cloning process with the new SSD through the SATA cable I bought from the beggining and worked! In anyway, thanks for your support, dude 👌
 

ASK THE COMMUNITY

TRENDING THREADS