Hello,
I recently build a completey new custom PC and have/had many problems. But to start somewhere here my noise problem with my aio.
All parts in my PC are new expect the AIO (NZXT Kraken X62) which was always installed as a push outtake on the top of my case.
Now with my O11 Dynamic Mini the radiator is installed at the side with tubes up. Because I heard the pump a little bit and some gurgling I flipped it with tubes down like Steve from GN recommanded.
Now the pump is even more gurgling. I thought because air bubbles are trapped in the pump, but now the funny thing:
When I do a CPU stressful task for 15min it becomes quiet for the howl session even in idle. When I let it cool down completely (Water Temp under 40°C) e.g. shut down for 1h it starts again gurgling.
My radiator should be placed correctly (see picture) the highest point of the loop is the radiator.
Could anybody tell me what I am doing wrong?
TL;DR
Pump is gurgling only if completly cooled down (Watertemp under 40°C). See Installation picture.
I recently build a completey new custom PC and have/had many problems. But to start somewhere here my noise problem with my aio.
All parts in my PC are new expect the AIO (NZXT Kraken X62) which was always installed as a push outtake on the top of my case.
Now with my O11 Dynamic Mini the radiator is installed at the side with tubes up. Because I heard the pump a little bit and some gurgling I flipped it with tubes down like Steve from GN recommanded.
Now the pump is even more gurgling. I thought because air bubbles are trapped in the pump, but now the funny thing:
When I do a CPU stressful task for 15min it becomes quiet for the howl session even in idle. When I let it cool down completely (Water Temp under 40°C) e.g. shut down for 1h it starts again gurgling.
My radiator should be placed correctly (see picture) the highest point of the loop is the radiator.
Could anybody tell me what I am doing wrong?
TL;DR
Pump is gurgling only if completly cooled down (Watertemp under 40°C). See Installation picture.

Last edited: