AIO pump connected to fan controller?

[koperan]

Hello

I have a Corsair H100i v2 and my case came with a "Fan Controller Board" to run my case fans. I have the controller(A) connected to CPU_FAN on my MB and the pump in to the the board(B).

would that affect the performance of my AIO in any way?

I do have a PWM splitter cable...should i split CPU_FAN and connect on to the fan controller and the other to the pump? would that be better?

I was just wondering because when i set my pump in corsair link to "performance" mode the MB fan goes to 1400rpm and pump to 2800rpm but when i set it to "quiet" pump goes to 1900rpm and MB fan goes to 900rpm in corsair link i dont know if the difference in rpms matter?

Thank you!

 

[RARRAF]

well really you want the h100i on its own connected to the CPU fan can the fan controller go anywhere else ???

 

[koperan]

would the fan controller work on CPU Optional/Water Pump Fan Connector or CHA_FAN1 and CHA_FAN2? it should right?

 

[RARRAF]

the fan controller should work fine on CHA_FAN1 and CHA_FAN2 just try it if it does not then put it on CPU Optional/Water Pump.