Am I Missing Anything?

[tougas]

Ok heres a list of what i plan on getting just want opinions and if im forgetting or missing anything.

FrozenQ Reactor Core V Series Reservoir - 160mm - http://www.xoxide.com/frozenq-reactorcorevseriesreservoir-160mm.html

Swiftech MCR320 Quiet Power 3x120mm Radiator - http://www.xoxide.com/swiftech-quiet-power-3x120mm-radiator.html

Danger Den CPX Pro 12V Pump - http://www.xoxide.com/danger-den-cpx-pro-12v-pump.html

Swiftech Apogee HD Water Block - White - http://www.xoxide.com/swiftech-apogeehd-waterblock-white.html

PrimoFlex Pro LRT Tubing 1/2" ID x 3/4" OD - Clear - http://www.xoxide.com/primoflex-clear-12-34.html

Koolance Liquid Coolant Bottle - Fluorescent UV Red - 700cc - http://www.frozencpu.com/products/15047/ex-liq-204/Koolance_Liquid_Coolant_Bottle_-_Fluorescent_UV_Red_-_700cc_LIQ-702RD-B.html


Monsoon Free Center Compression Fitting - 1/2"ID x 3/4"OD - Single White - http://www.frozencpu.com/products/15832/ex-tub-1272/Monsoon_Free_Center_Compression_Fitting_-_12ID_x_34OD_-_Single_White_FCC-1234-1P-WH.html

Total price around 330 USD

 

[boiler1990]

Those are some nice comp fittings. I think I found the fittings for my next big build in a few years 😀

 

[Lutfij]

saw the orange and i instantly thought - there's boiler1990's "hard tubed steampunk build".

so i should just go with high speeds and use a fan controller?

yeah.

 

[Motopsychojdn]

Yup, more love for those fittings from me
+1 high speed fans and controller (or two,maybe three if you need 😛)
my Blue wings are 1500rpm but on low speed 6v, maybe 600rpm? and I really can't hear my Pc sat on my desk next to me
**Edit, pump looks fine, as long as you're happy with the mobo controlling it, four metre head is good and strong
Moto

 

[tougas]

couldnt i power that pump using a fan controller if i have enough W per channel?

 

[Motopsychojdn]

Good thinking there that man,
I knew there was something about you hehe
yes, as long as your Fc has at least 18w on a channel you can use it to alter the pumps power, I would make sure you never alter it unawares though hehe
and if you have the setting on low, bear in mind start voltage may be higher, I.e you might have to start the pump on high and lower it each time you start the Pc up
Moto

 

[tougas]

Due to lack of space I'm thinking of making my own that will come through the side panel. Still trying to work out the details in my mind but the way I see it is if i cut some 3 pin extensions and put the bare wires to a variable knob and also add a molex extension to add power I could successfuly make a fan controller. Then I should be able to chain some off of the same molex. Just need to work out the math. I may even turn it into a tutorial lol

 

[Lutfij]

^ you seem to be a modo twin

 

[tougas]

ill take that as a great compliment

 

[Lutfij]

and it was hows the setup looking?

 

[tougas]

its looking good. expensive but good. ill probably buy it next pay check. just need to double check everything.

 

[Motopsychojdn]

Hrmm.., an apprentice have I?
your cable management good it is?
see we shall if worthy to be a nutcase you are,
and by proxy, thank you also for the compliment Lutfij
we seem to be getting a solid group of Modders/Wetheads together now,
with Toolmaker and Sam here Toms might get known as a crazy mod place
Moto

 

[tougas]

Ill be happy to join

 

[Lutfij]

* i don't know how to link the audio int this post, but here goes
http://www.yodajeff.com/multimedia/sounds/episode1/alwaystwo.wav

 

[tougas]

What's that mean ^ lol

 

[Motopsychojdn]

I was actually going to quote this given your comment hehe
http://www.yodajeff.com/multimedia/sounds/
**Edit, hmm yeah can't link individual wavs
Always two there are, a master, and an apprentice

thats what we were trying to link, you are my padawan hehe
😛
Moto

 

[tougas]

Very well

 

[Motopsychojdn]

Seriously though, it is great to have someone here with the same attitude to finding ways to get things done, and it only benefits the Toms community to have six or seven of us nutters bouncing ideas off each other, have you checked out the W/c discussion room? theres some wonders in there hehe
http://www.tomshardware.co.uk/forum/270566-11-discussion-thread-watercooling-closed-loop-coolers
it started off as a debate between Closed loops and real water, but we discuss allsorts in there
**Edit, officialish list of Toms nutters,
4Ryan6
Rubix_1011
Lutfij
Boiler1990
Toolmaker_03
Tougas
I'm sure I've missed one or two but I can add later 😛
Moto

 

[Lutfij]

:lol: - am honored seeing my name on that list - but am I worthy of the "nutters" title?

 

[Motopsychojdn]

Oh yes, you've come out with some cracking ideas, plus your modding (and subsequent hatred of) of the H50 puts you in the genius bracket
Moto

 

[Lutfij]

(and subsequent hatred of)

hehehe! much appreciated... !

 

[tougas]

...officialish list of Toms nutters,...

Officialish must always be in the name now. I will now be using this word lol

 

[tougas]

you guys need to check this out http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=33961 its a new kill plug

 

[Motopsychojdn]

Shiny, might try and find those over here 🙂
Moto

 

[Lutfij]

yeah i saw that, but that seemed nice for a bay res plug - or maybe with a t-line maybe even in a frozen res

but a nifty idea no-the-less!

specialtech might have them...?

 

[tougas]

im thinking to use it like a fill plug on my res