AMD Overclocking Club

[saint19]

The ES should be more a CPU-Z problem than your problem guys, if you want be sure take a look of your batch CPU and confirm with google

 

[lowjack989]

Updated :

1- The rules for OC stable are this:

Since, when did you start making the rules for the club?

 

[noob2222]

Since, when did you start making the rules for the club?

That's a copy and paste from the first post on page 1, sorry I didn't proof read it.

 

[lowjack989]

Just checking

 

[homefellas87]

Really you have great knowledge. i m appreciated...............

 

[cloudstrife1188]

Here is an update on that FX 8150 (ES) chip. Ran cinebench 11.5 @ 4.94Ghz. Notice CPU temps are really low. Usually when i max them out they don't go over 50C @ over 5Ghz. I changed the way my radiators run. If you want me to post a 6Ghz score. I'm gonna need some help from professionals here on how to go about doing that. What voltage would you think is right?



Uploaded with ImageShack.us


http://imageshack.us/photo/my-images/10/cpu494ghz.png/

 

[kaitheus]

Here is an update on that FX 8150 (ES) chip. Ran cinebench 11.5 @ 4.94Ghz. Notice CPU temps are really low. Usually when i max them out they don't go over 50C @ over 5Ghz. I changed the way my radiators run. If you want me to post a 6Ghz score. I'm gonna need some help from professionals here on how to go about doing that. What voltage would you think is right?

[url]http://img10.imageshack.us/img10/9615/cpu494ghz.png[/URL]

Uploaded with ImageShack.us


http://imageshack.us/photo/my-images/10/cpu494ghz.png/

Impressive clock's! can't wait to see what the FX-8170 can do once I get my hands on one lol. I'm happy just with my PII at 4GHz but dang nearly 5GHz C_C that sounds more appealing every time I see it lols

 

[noob2222]

Here is an update on that FX 8150 (ES) chip. Ran cinebench 11.5 @ 4.94Ghz. Notice CPU temps are really low. Usually when i max them out they don't go over 50C @ over 5Ghz. I changed the way my radiators run. If you want me to post a 6Ghz score. I'm gonna need some help from professionals here on how to go about doing that. What voltage would you think is right?

I found this article most interesting on BD ocing
http://www.overclock.net/t/1140459/bulldozer-overclocking-guide-performance-scaling-charts-max-ocs-ln2-results-coming

 

[allbaitron]

Nice job piranhamoose !

 

[MIKO30]

how to overclock amd sempron 140 on my ecs 6100pm-m2 mobo?
THANKS

 

[lowjack989]

how to overclock amd sempron 140 on my ecs 6100pm-m2 mobo?
THANKS

Your set-up is non-condusive for OCing...So its not even a good forum post...In short ,..."Ya gotta pay to play"

 

[nicepostoing]

I've got a stable overclock, examined 18h on prime 95, I simply attempted raising the NB frequency after which went prime95 again, right when i was saving the screenshot after 2 hrs and 22 minutes of torture test, I acquired the BSOD. So, I called my NB normal again and can edit this publish when I have run the best 95 again (It has been stable for 18h but did not have a screenshot because I had not seen this thread yet) and also have become a screenshot that saves without giving me the dreaded BSOD... XD

Meanwhile, I am less than sure things to put my cpu lower as, because its a Athlon II X3 440, unlocked to some supposed Phenom II X4 B40, after which overclocked. I'll just let it rest as what CPUZ states it's:

Cpu: AMD PHENOM II X4

Title: DANIEL-PC

Walking: BL-C2

Frequency: 3536.73 Mhz

Ref*Multi: 235.78*15

CPU current: 1.452v (which rises to ~1.47v under load)

CPU-NB: Auto

NB Frequency: 1886

NB volts: Auto

RAM: 4GB 1572 Mhz DDR3 7-8-7-24-1T @ 1.5V

System board: ASUS M4A87TD/USB3

Cooling: Air cooling / Thermaltake Contac 29

OS: Home windows 7 Ultimate 64 bit

Like I stated before, I'll edit this publish once I have run prime 95 AGAIN to publish a picture having a effective 2h run.

____________________

 

[Hikaru_60]

I don't have any money for a new computer! If i did i would buy a 8150! Pentium 4's suck.

 

[Illest]

hot stuff

 

[Neocloud]

Ok this is weird....

Cpu: 965
Name: NeoCloud
Stepping: C3
Frequency: 4080
ref*multi: 240*17
CPU voltage: 1.488
CPU-NB: auto(1.1)
nb frequency: auto(1920)
NB volts: auto(1.3)
RAM: 2x2GB 1800Mhz DDR3 9-9-9-24-1T @ auto (1.65)
Motherboard: ASUS-M4A89GTD-PRO/USB3
Cooling: Air cooling/TT Black Widow V1
OS: 7 32-bit
GFLOPS: N/A

http://valid.canardpc.com/show_oc.php?id=1846908

At least I finally got my vcore down from 1.55 to 1.488 now,lol.I can do anything but run prime95 for more than 10 mins.It raises my core temps past 120F and crashes to bios at no matter what i set vcore/multi/fsb to.I need to figure out what to set dram/NB/HT freq to.Also...when I try to print the TH OC Club table,only a graph lined paper comes out,it there any way to print the table with the numbers on it?(maybe just some wierd printer settings)if not, no big deal.I know this isnt going on the stable table but could you add my highest insane @ 4.247(vcore was too high at 1.56) I could get without crashing yet instead of the one I have on there now?Here is cpuz for that
http://valid.canardpc.com/show_oc.php?id=1845779

Hey saint my mobo is ASUS not Gigabyte

 

[donkeywax]

hi i run prime 95 blend test and it stopped test on worker 4 only after 2 hours 8 minutes,
does this mean my overclock is not stable,
wasnt sure im new to this could there be another reason for the error,
thankyou

 

[lowjack989]

Yeah your OC is unstable if one of the workers stopped

 

[donkeywax]

lowered my fsb and ran prime 95 blend test again,
and again it stopped worker 4 after 2 hours 8 minutes the other three cores kept running like last time,
is there somthing i can do which will effect core 4 more than the others thanks

 

[donkeywax]

this is picture of my stable overclock.
http://imageshack.us/content_round.php?page=done&l=img40/1516/55559646.jpg&via=mupload&newlp=1#

cpu: 965
name: donkeywax
stepping: c3
frequency: 4003.5
ref*multi: 210.7*19
cpu voltage 1.456
cpu-nb: auto
nb frequency: 2528.6
nb volt: auto
ram 8gb 1404.8mhz ddr3 9-9-9-24-2t @1.5v
motherboard: asus m4n75td
cooling: air cooling/hyper 212evo
os: 7 64bit

hi saint hope this is everything you need thanks

 

[donkeywax]

http://imageshack.us/photo/my-images/194/2ndattempto.jpg/

this image stable second attempt bit higher sorry

cpu : 965
name: donkeywax
stepping: c3
frequency: 4108.9
ref*multi: 210.7*19.5
cpu voltage: 1.470
cpu-nb auto
nb frequency: 2528.6
nb volt: auto
ram 8gb 1404.8mhz ddr3 9-9-9-24-2t @1.5v
motherboard: asus m4n75td
cooling: air cooling/hyper 212evo
os: 7 64bit

hope this is ok,

 

[donkeywax]

sorry cpu voltage should read 1.475,
tried uping voltage to 1.5 and raising the multiplier to twenty but it cant get it stable,
i tried lowering fsb to 210 from 212 as at 212 only reads as 210.7 on cpuz,
it ran hourish prime95, then my system restrated any body any ideas,
id liked to get it higher my temps are still good, thankyou

 

[donquad2001]

http://community.webshots.com/album/582040605HDatAQ

 

[lowjack989]

sorry cpu voltage should read 1.475,
tried uping voltage to 1.5 and raising the multiplier to twenty but it cant get it stable,
i tried lowering fsb to 210 from 212 as at 212 only reads as 210.7 on cpuz,
it ran hourish prime95, then my system restrated any body any ideas,
id liked to get it higher my temps are still good, thankyou

I had to find the multiplier maximum...Then I went back FSB and Multiplier method...Check my settings on the stable OC list...It took a lot of voltage on the CPU..@100% load my board pushed the vcore up to 1.56v from my initial BIOS setting of 1.536v....I kept the tempeture down and the chip survived the test(s) : Prime95...2 hours-->small fft's, then ran blend, then I got really froggy and pushed it one more time for the large fft's ...MAX STRESS...She got warm for a bit ...Max temp was 58c....My screenshots are up on here also..Oh I almost forgot, watch out for the NB and HT speeds when upping the FSB as this was the cause of my instability...I was right on the edge had the NB at 2828 MHz and HT was at 2630 MHz...So I pulled the NB and HT back to NB:2600 MHz and HT:2400 MHz and viola...Solid OC...I hope that helps

 

[mjaime1217]

Hey Guys hope I did it right. I've only been messing around with OC'ing for the past couple of months so.

CPU: PHENOM II X4 955 BE
Name: mjaime1217
Stepping: 3 (Revision RB-c3)
Frequency: 3898
Ref*Multi: 210*18.5
CPU Voltage: 1.404
NB Frequency: 2107
NB volts: Auto
Ram: 8GB G.Skill 1600Mhz 9-9-9-24-1T Auto Volt @1.5V
Motherboard: ASUS Sabertooth 990FX
Cooling: Cooler Master Hyper 212 Evo w/Push-Pull
OS: Windows 7-pro 64bit
Temperatures: 33C Idle and 50C Load
Case: Rosewill Challenger
PSU: SeaSonic X750 Gold

Screen Shot

CPU-Z

 

[bartholomew]

Can fx 8120's stock heatsink handle a mild OC(3.6)?