Antec 620m psu 10 pin pci-e to 6 pin pci-e?

[richwillis99]

I have bought a geforce gtx 970 card and need 2* 6 pin pci-e adaptors.
my Antec 620m psu has 10 pin pci-e outputs only
Can i buy 10pin to 6p in adaptors or is there any other size that will work?
advice appreciated!
thank you

 

[logainofhades]

Is this your PSU? http://www.newegg.com/Product/Product.aspx?Item=N82E16817371059

If so, then you have 2x 6+2 connectors. The 10 pin side I believe plugs into the PSU itself.

 

[richwillis99]

Is this your PSU? http://www.newegg.com/Product/Product.aspx?Item=N82E16817371059

If so, then you have 2x 6+2 connectors. The 10 pin side I believe plugs into the PSU itself.

Thank you - yes this is the psu - support pdf says:
"MODULAR CABLE JACKS
There are two 5-pin black jacks and four 10-pin red jacks on the back of your HCG-620M PSU. These jacks are for the optional cables that come with your power supply. A modular 10-pin connector system allows you plug 5-pin connectors into the 10-pin jacks if you run out of 5-pin jacks."

 

[logainofhades]

Yes, the red 10 pins plug into the PSU. The 6+2 plugs, on the other end, are for your graphics card.

 

[richwillis99]

So I could connect 2 * 8 (6+2)-pin to 6 pin cables then?

 

[richwillis99]

I have not been able yet to find 10 pin to 6 pin?
the two additional supplied 6+2 cables did not fit into the psu 10 pin outputs

 

[logainofhades]

Your cables should be 10 pin on one end, and 6+2 pin on the other end, like these.

The red ones plug into the red ports on the PSU, like this.

The 6+2 pins will plug in like this.

 

[richwillis99]

thank you - i shall look for the 10 -> 6+2 cables

 

[richwillis99]

for anyone else with the same issue - I have found cables at moddiy.com:

Antec HCG 620W Modular PSU Sleeved PCIe 10-Pin to 8-Pin + 6-Pin Cable
(Length: 30cm) -Note: comes in different lengths also
SKU: CAB466