Question Arctic Liquid Frezer 3 360mm tube orientation

[SteveBeast]

So I have the arctic freezer liquid 3 360 and a bequiet pure base 500dx case. The case isn't that big and I maybe could use the radiator in the front with the tubes at the bottom but it would bend the tubes a bit. Is that a problem? The only other option would be to have the tubes at the top, but I heard it's not the best option

It would look like on the photos

Photos

 

[Lutfij]

Can you fit a discrete GPU into the slot without adding tension to the tubes running up to the CPU block? The bends don't look bad. Might want to add images of the system from a distance and with the case right side up after securing the AIO to the front of the case.

 

[SteveBeast]

Can you fit a discrete GPU into the slot without adding tension to the tubes running up to the CPU block? The bends don't look bad. Might want to add images of the system from a distance and with the case right side up after securing the AIO to the front of the case.

I'll send a Pic tomorrow