Question Are all these parts compatible and is the power supply enough?

[Jesse926]

Hi all,

I'm picking out parts for my 2nd PC build, first one I built was five years ago. I would just like some input to make sure these parts will function together and are a good fit. From my research it seems they are good but I just want to make sure/ get a second opinion, here it is:

CPU: Ryzen 7 5700X
Cooler: Vetroo V5 52 CFM
Motherboard: Asus TUF Gaming B550-Plus WIFI ATX AM4
RAM: Corsair Vengeance LPX 32 GB (2x16) DDR4-3600 CL18
Storage: Crucial P3 Plus 1 TB M.2-2280 PCIe 4.0 X4 NVME SSD
GPU: Asus DUAL EVO OC GeForce RTX 4070 Super 12 GB
Case: Montech XR ATX Mid Tower Case
PSU: Corsair RM750e (2023) 750 W 80+ Gold Certified Fully Modular ATX Power Supply

-Would I need to 2 or 3 case fans under the GPU blowing up at it or does this case have sufficient airflow with the 2 intakes on the side and the exhaust in back?
-Can I replace M.2 Drives and reuse the provided heatsink and pad on the new drive?
-I read the Vetroo V5 is plenty of cooling for the 5700X, do you agree?
-Does anything stand out as physically not being able to fit in together? Like cooler too big for case or hitting RAM?
-Would It be better to get a 4070 super with 3 built in fans?

Thanks for checking out the post. I hope this is the right forum to post it in.

 

[Why_Me]

Hi all,

I'm picking out parts for my 2nd PC build, first one I built was five years ago. I would just like some input to make sure these parts will function together and are a good fit. From my research it seems they are good but I just want to make sure/ get a second opinion, here it is:

CPU: Ryzen 7 5700X
Cooler: Vetroo V5 52 CFM
Motherboard: Asus TUF Gaming B550-Plus WIFI ATX AM4
RAM: Corsair Vengeance LPX 32 GB (2x16) DDR4-3600 CL18
Storage: Crucial P3 Plus 1 TB M.2-2280 PCIe 4.0 X4 NVME SSD
GPU: Asus DUAL EVO OC GeForce RTX 4070 Super 12 GB
Case: Montech XR ATX Mid Tower Case
PSU: Corsair RM750e (2023) 750 W 80+ Gold Certified Fully Modular ATX Power Supply

-Would I need to 2 or 3 case fans under the GPU blowing up at it or does this case have sufficient airflow with the 2 intakes on the side and the exhaust in back?
-Can I replace M.2 Drives and reuse the provided heatsink and pad on the new drive?
-I read the Vetroo V5 is plenty of cooling for the 5700X, do you agree?
-Does anything stand out as physically not being able to fit in together? Like cooler too big for case or hitting RAM?
-Would It be better to get a 4070 super with 3 built in fans?

Thanks for checking out the post. I hope this is the right forum to post it in.

I don't know much about those fish tank cases but everything else looks good. That dual fan gpu will work fine.

 

[Jesse926]

I don't know much about those fish tank cases but everything else looks good. That dual fan gpu will work fine.

Great, thanks for the info. Out of curiosity is there a case you would recommend for these parts?

 

[MEMOFLEX]

Great, thanks for the info. Out of curiosity is there a case you would recommend for these parts?

The case you have picked is one of the many now available that are similar to the original O11 dynamic case from lian li. I currently use an O11D Evo case which is similar and the cooling is good and aesthetically it looks very clean.

I use 3 x 120mm on the bottom and a 280mm radiator with push pull on the side. 2 x 140mm on top and a 120mm on the rear exhausting.

The difference with the Montech case is that it is a single chamber so the PSU sits at the bottom of the case so it may obstruct one or two of the bottom fans in some way. Worth looking at although the case is significantly cheaper than an O11 so some sacrifices will be made.

Is it specifically a Fish Tank type case you are after?

 

[Jesse926]

The case you have picked is one of the many now available that are similar to the original O11 dynamic case from lian li. I currently use an O11D Evo case which is similar and the cooling is good and aesthetically it looks very clean.

I use 3 x 120mm on the bottom and a 280mm radiator with push pull on the side. 2 x 140mm on top and a 120mm on the rear exhausting.

The difference with the Montech case is that it is a single chamber so the PSU sits at the bottom of the case so it may obstruct one or two of the bottom fans in some way. Worth looking at although the case is significantly cheaper than an O11 so some sacrifices will be made.

Is it specifically a Fish Tank type case you are after?

No not specifically, although it is the style that I've liked the most scrolling through options. From builds I've seen people have been able to mount all 3 120mm fans on the bottom. Not sure if they had to do anything special to make that happen though. I think I have plenty of room on the PSU to add case fans if needed, though I'm hoping that the 3 provided is enough to keep things cool.

 

[Jesse926]

No not specifically, although it is the style that I've liked the most scrolling through options. From builds I've seen people have been able to mount all 3 120mm fans on the bottom. Not sure if they had to do anything special to make that happen though. I think I have plenty of room on the PSU to add case fans if needed, though I'm hoping that the 3 provided is enough to keep things cool.

Is 750W plenty for this build or should I get the corsair rm850e? There would be no down sides to getting a larger capacity CPU right?