Artifact showing while overclocking

[ritnerrobert7]

I'm trying to overclock my gpu in msi afterburner, and I found a sweet spot for it, but the problem is when i tryed to leave it for a final stress test, after 10 minutes, it showed me 0/1 artifacts. It is ok to leave it like that or should i lower the core clock and the memory clock so I get 0/0?

 

[prince_xaine]

Yup if you are getting an artifact, its not stable. I'd lower it by maybe 5 on each level. Then you'll probably be good.

 

[mahanddeem]

That means it's not stable. Back up a bit.

 

[10tacle]

You can try setting the voltage boost higher but that will also increase the temp under load meaning you'd need a more aggressive fan profile. But yes, you have pushed it too far as is.