ASROCK 890GX PRO3 with amd fx 6100 after bios flash and NO POST

[Saber_1ST]

hey everyone,
i have a big problem and it is:
i flashed my default bios to the latest version with amd sempron 145. then i turned of my pc, disconnected power cable and replaced the sempron with amd fx 6100 BE. after that i trned my pc on and i got no post and error code 84 and sometimes 1F error code.
oh and one more thing when i use my sempron cpu pc works fine.
PC SPECs:
cpu: amd fx 6100 / amd sempron 145.
mobo: asrock 890gx pro3 am3+.
gpu: xfx radeon hd 5450 1GB ddr3.
ram: 1x4GB kingston ddr3 1333mhz.
psu: low end atx 550 (just for you to know it has only 4 pin 12v cpu cable)
PLEASE guys, fast reply i am in desprete situation :bounce

 

[GhislainG]

Are you 100% positive that CPU works fine? Like cin19, I have some doubts.

 

[Saber_1ST]

Are you 100% positive that CPU works fine? Like cin19, I have some doubts.

SORRY for the late reply. i have notices that with the sempron it passes "4d" debug and boot fine, but now with the fx it is stuck in this "4d"error.

 

[cin19]

0x3F-0x4E= OEM post memory initialization codes, which is from the manual http://www.asrock.com/mb/AMD/890GX%20Pro3/?cat=Manual

Try use other RAM, or other slot, or maybe the memory slot has problem, or even the cpu too.

 

[Saber_1ST]

0x3F-0x4E= OEM post memory initialization codes, which is from the manual http://www.asrock.com/mb/AMD/890GX%20Pro3/?cat=Manual

Try use other RAM, or other slot, or maybe the memory slot has problem, or even the cpu too.

thanks. I will try a 1600MHZ memory and tell you the news.

 

[GhislainG]

Are you 100% positive that CPU works fine? Like cin19, I have some doubts.

SORRY for the late reply. i have notices that with the sempron it passes "4d" debug and boot fine, but now with the fx it is stuck in this "4d"error.

The memory controller is on the CPU; I still doubt that it works fine. In the end you'll probably have to return it and get another one.

 

[Saber_1ST]

HEY, everyone did i tell you that the MOBO shows Multiple error codes before error code "4d".

 

[madmatt30]

Sneaky feeling you need 4+4 pin 12v plugged in to run the 6100 mate.

 

[Saber_1ST]

Sneaky feeling you need 4+4 pin 12v plugged in to run the 6100 mate.

THANKS for the for the suggestion.i'll look for another PSU with 2x4 pin 12v cable. and i will tell you whats new.