[SOLVED] Asrock B450m Pro4

[JuniorBigOne]

hi, I bought parts to assemble a Pc.

Mobo - Asrock B450m pro4
Cpu - Amd Ryzen5 3600x
G.SKILL Ripjaws V series 288pin ddr4 3600.
Evga 600br atx 600w.

well, I set up the pc and there was no video. I researched about, my card's bios is p3.90, so it works with the cpu.
the memories that the card accepts at most 3200, but I bought the wrong 3600, would that be a problem or just not using all the memory power?
I removed the memories to test the video, not even a beep and also, no video.
I put a USB mouse, it turns on and remains on, as if it were working, the fans running, only the video that does not appear.

Any idea ? Thanks Advance.

no vídeo, no beep.

 

[Phaaze88]

You have a dedicated gpu, right? Only the A and G series cpus have integrated gpus.

 

[JuniorBigOne]

Noooo... this mobo

hi, noooo.
this mobo has hdmi and dvi. Do I still need the gpu?

Thanks

 

[Phaaze88]

Yes, you do. There's no built-in graphics processing on the motherboard, nor in the cpu itself.
If you had something like the Athlon 200GE, or Ryzen 2200G/2400G, then you could use the mobo HDMI and DVI to get video. Those have built-in Igpus.

 

[JuniorBigOne]

Yes, you do. There's no built-in graphics processing on the motherboard, nor in the cpu itself.
If you had something like the Athlon 200GE, or Ryzen 2200G/2400G, then you could use the mobo HDMI and DVI to get video. Those have built-in Igpus.

Ohhhh... thanks a lot man... what about memories? do you think there are any problems?

 

[GorillaMonsoon]

You can set your memory speed in the BIOS. Chances are it defaulted to the stock DDR4 speed of 2133Mhz...At least my 3200Mhz did, and I had to manually set it.
I got the same mobo too.

 

[JuniorBigOne]

You can set your memory speed in the BIOS. Chances are it defaulted to the stock DDR4 speed of 2133Mhz...At least my 3200Mhz did, and I had to manually set it.
I got the same mobo too.

But I bought memories 3600... it’s not problem, right? And do you use on a2 and b2 slots ? Thanks

 

[Phaaze88]

Ohhhh... thanks a lot man... what about memories? do you think there are any problems?

No, it's going to be at 2133mhz by default. To get the advertised speeds you'll need to go into bios yourself to enable the A-XMP profile, but at the moment, you can't get any picture.

 

[GorillaMonsoon]

But I bought memories 3600... it’s not problem, right? And do you use on a2 and b2 slots ? Thanks

It's no problem, and yes a2b2