Question AsRock H110 Pro BTC+ Miner not displaying output

[Morgs-gps]

Hi guys,

So recently I've acquired some gear from a friend and it's to mine crypto.
The gear I have is as follows:

AsRock H110 Pro BTC+
2x4GB 2133MHz Corsair Vengeance RAM
Intel I3-9100F
6 x GTX 1060 like GPU's from China
Corsair HX100i PSU
WD Blue 1TB Hard Drive

The issue I'm having is that when I plug a DVI Cable from the motherboard to the monitor no output is being produced.
I've watched set up videos on youtube such as -

View: https://www.youtube.com/watch?v=-sdbd8KEMUI
and followed their build.
The whole system powers up when I turn it on as the cpu, gpu and psu fans are spinning but still no output to the monitor.
I don't have a motherboard speaker to hear the beeping sounds on startup.

Any ideas?

 

[rgd1101]

Intel I3-9100F have no igpu

 

[Morgs-gps]

Intel I3-9100F have no igpu

Advice?

 

[rgd1101]

use 1 of the card as output? or get a cpu with igpu

 

[Morgs-gps]

use 1 of the card as output? or get a cpu with igpu

Tried using an RTX 2070 as output and bought a CPU with integrated graphics and still nothing </3

 

[rgd1101]

did you bought a cpu that support on the motherboard?
h110 only work with 6th/7th cpu
https://www.asrock.com/mb/Intel/H110 Pro BTC+/index.asp#CPU

 

[Morgs-gps]

Yeah, i bought a cpu that's on the supported list - Intel Pentium G4400

 

[rgd1101]

did you test boot with just the cpu/ram/ssd?

 

[Morgs-gps]

Yupp, no luck sadly

 

[rgd1101]

using dvi to a dvi monitor? or using some adapter ?

 

[Morgs-gps]

Dvi to Dvi yeah